Keller's Welding and Metal Fabrication, LLC

Keller's Welding and Metal Fabrication, LLC Specializing in vehicles; restoration, rot repair, hot rods, flatbeds, bumpers, and roll cages. Regular shop hours with after hours available by appointment.

We also do agricultural and residential welding- steel, including stainless and aluminum. Kellers Welding and Metal Fabrication, LLC was established in November 2013, after many years of planning. Our shop is located just off of 895, very close to Hawk Mountain. We are fully insured, and pride ourselves in offering high quality/ prompt, professional service, at very reasonable rates. We are a hus

band and wife team. I am the scheduler, biller, and all things office related. Bill is the welder and fabricator. He has his certification from American Testing Lab in Lancaster, PA. Bill has 16 years of welding and fabricating experience, which began as dabbling in the basics at Sapa, doing repairs as part of the brick shop, later he continued employment as a welder at Krammes Kustom Bodyworks, building and welding truck bodies and also doing hydraulics, and most recently, before opening our shop, he was the primary welder/ fabricator at Lift, Inc. where he was responsible for industrial and commercial welding and fabricating. In addition to his professional welding career, he has welded at home in his “off” time, everything from vehicle rust repair to jeep and motorcycle customization's, animal feeders and garden trellises, etc. Bill can weld any type of steel (carbon to stainless) or aluminum. He is an incredibly versatile and talented welder, can repair anything metal and has done many custom fabrications from safety upgrades, to machinery customization's, to total builds off of drawings, verbal descriptions. and blueprints. I can provide references upon request. We would love to help with any of your welding needs!

Nova passenger side before, during, and after photos (mini tub and quarter).
11/06/2025

Nova passenger side before, during, and after photos (mini tub and quarter).

What we have been busy with for the past month or so..
10/26/2025

What we have been busy with for the past month or so..

08/14/2025
One way then the other, lots of sanding and nitpick-y repairs. The bottom of the GTO was sprayed in epoxy primer yesterd...
08/14/2025

One way then the other, lots of sanding and nitpick-y repairs. The bottom of the GTO was sprayed in epoxy primer yesterday and black chassis topcoat today- didn't get a pic to that yet- ( Bill also put some por15 in the cross members and crevices). It'll be going back on the frame very soon!

1969 Bronco that we had the pleasure of working on. We looked at this project a while back and have fixed things on the ...
08/12/2025

1969 Bronco that we had the pleasure of working on. We looked at this project a while back and have fixed things on the owners schedule. The roll cage was put together wrong at another shop. The customer cut it apart and Bill was able to build it into the truck correctly. He also was able to attach the windshield frame and start adjusting door gaps. It's coming along nicely! It's fantastic to be a part of such a terrific project!

From truck right to sign frame. No rest for Bill this week!
04/13/2025

From truck right to sign frame. No rest for Bill this week!

Before and after pictures of a daily driver Ford truck. The half doors, cab corners, and rockers are now looking as goo...
04/12/2025

Before and after pictures of a daily driver Ford truck. The half doors, cab corners, and rockers are now looking as good as new!

Your PSA for the day... Spray foam is not a welders friend!!
04/09/2025

Your PSA for the day... Spray foam is not a welders friend!!

03/25/2025
More before and after photos of Bill picking away at the Chevy. Every detail matters. The first is the hood cowl box... ...
03/22/2025

More before and after photos of Bill picking away at the Chevy. Every detail matters. The first is the hood cowl box... You can raise a box to vent air into the cab. Under the box is a catch for water that drains through a tube that runs under the hood. Next is the inside front of the roof. This was very rotted and had to be repaired (by hand) inch by inch because there isn't a prefabbed replacement. Then Bill addressed the bottom outside of the roof towards the windshield. There was rot which had to be fixed by hand and a dent that had to be finessed out. And as a bonus, enjoy the Bill picture ( he is so photogenic!). It's not long now and the block sanding will start!

Remember this beauty? The owner has been working on putting the Pontiac all together. The doors are jammed out and some ...
03/12/2025

Remember this beauty? The owner has been working on putting the Pontiac all together. The doors are jammed out and some of the interior painted in the yellow that will eventually cover the body. And Grayden is putting in the rebuilt motor this week. Still a very cool project to have a hand in!

Address

1515 Red Dale Road
Orwigsburg, PA
17961

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 9am - 5pm

Telephone

(484) 332-0694

Website

Alerts

Be the first to know and let us send you an email when Keller's Welding and Metal Fabrication, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Keller's Welding and Metal Fabrication, LLC:

Shortcuts

Share

Category