DMented Motorsports

DMented Motorsports "From Sick Swaps To Burnout Machines"

The "Risky Tune" Forester XTi getting an oil change.
05/23/2023

The "Risky Tune" Forester XTi getting an oil change.

For the late, great, Ken Block. Happy Ken Block Day everyone! You will be missed.
04/04/2023

For the late, great, Ken Block. Happy Ken Block Day everyone! You will be missed.

We've been doing fun things lately.
02/28/2022

We've been doing fun things lately.

Finally, we put a bigger header on the car, as well as swapped the 3-Port Boost Control Solenoid, and the Recirv Valve. ...
02/20/2022

Finally, we put a bigger header on the car, as well as swapped the 3-Port Boost Control Solenoid, and the Recirv Valve. It's UELH, so yes, I understand what you're going to say, but the sound is amazing. Here are some comparison photos. I'll have a Dyno sheet tomorrow on the Pro-Tune this week. I can also include a sound clip if you'd like. Let me know if you guys have any requests.

In Phase 2, we increased the Exhaust Flow from the Turbo and decided to have the "J-Pipe" match the Cat-Back. So, I ran ...
02/18/2022

In Phase 2, we increased the Exhaust Flow from the Turbo and decided to have the "J-Pipe" match the Cat-Back. So, I ran a Cobb "Jazzy" Catted J-Pipe setup. Here are some before and afters. Again, I'm not too sure of the sound change, as I couldn't run all of this without a tune. When I'm finished with all of the Performance Part Posts, I'll post sound clips and HP numbers.

In Phase 2, we not only swapped the second piece of the Intake, we also put in a brand new Perrin Turbo Charge Pipe and ...
02/17/2022

In Phase 2, we not only swapped the second piece of the Intake, we also put in a brand new Perrin Turbo Charge Pipe and Cobb Recirculation Valve. The Turbo Pipe required a little fab work, but the Recirc Valve fit perfectly. Here's a side-by-side of the original and after market. The other photo is what it looks like installed.

Subaru

First off, we spent a complete day building the FXT. We went ahead and changed the 2nd piece to the Intake. This made a ...
02/17/2022

First off, we spent a complete day building the FXT. We went ahead and changed the 2nd piece to the Intake. This made a smooth transition of air through the Intake into the Turbo. I have no clue what this did for the car since this requires a tune, but I'll report back after this tune is complete.

02/13/2022

Had a late night getting Phase 1 complete on the FXT yesterday. Hopefully we finish up Phase 2, and are ready for Protuning tomorrow. Standby for a huge progress update.

Over the last week we installed a Cobb AccessPort Mount. It places the Accessport up on the dash in a Visible Spot, and ...
01/22/2022

Over the last week we installed a Cobb AccessPort Mount. It places the Accessport up on the dash in a Visible Spot, and still retains use of that vent. It looks great. If you have any questions on how to do this with your 2016 FXT, feel free to give me a shout!

Today we installed a Perrin Performance Intake on a 2016 FXT. Needed a bit of custom work to fit accordingly. Thank you ...
01/16/2022

Today we installed a Perrin Performance Intake on a 2016 FXT. Needed a bit of custom work to fit accordingly. Thank you to Angel at -Zero Racing for the help. Car sounds great. These are in stock. Hit me up if you have any questions or are interested in purchasing this item.

Subaru

12/25/2021

Merry Christmas from all of us here, to you and your family!

Lots to do. Lots to do. Just some photos from the weekend, while we pull the XT6 apart. It's in pretty bad shape. Happy ...
09/27/2021

Lots to do. Lots to do. Just some photos from the weekend, while we pull the XT6 apart. It's in pretty bad shape. Happy to see it get put back together.

Address

Oak Ridge North, TX
77385

Alerts

Be the first to know and let us send you an email when DMented Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to DMented Motorsports:

Share