Pocket Card Slab

Pocket Card Slab Get all your Pokémon Trading Cards from us, we ship worldwide.

Slab Flareon Master Ball Reverse Holo PSA 10 ( very low population)
03/24/2026

Slab Flareon Master Ball Reverse Holo PSA 10 ( very low population)

12/06/2023

Egis Breakout box? I purchased it in hopes to clean up my wiring install for distribution for my switched 12v and smaller grounds.

I’m planning to run a fused 14gauge “add a fuse tap” from slot 18 to the stud.

I will be using 3 of the channels for the switched 12v for a Holley sniper box, Pro dash 6.86, and for the red/white wire for the terminator x.

6.86 or 7 inch holley screens. Our column. Mount are perfect. These mount to any round column. All that is required i...
12/06/2023

6.86 or 7 inch holley screens. Our column. Mount are perfect. These mount to any round column. All that is required is ur column diameter.

Holley EFI Terminator X Max
12/06/2023

Holley EFI Terminator X Max

Redesigned TFI adapter. Eliminated a slight misfire on the test vehicle and gave a better idle.
12/06/2023

Redesigned TFI adapter. Eliminated a slight misfire on the test vehicle and gave a better idle.

Holley Terminator X Max for 4.6 DOHC with 4R70W for sale. My system is a 1 year old 550-1318 setup, complete with ne...
12/06/2023

Holley Terminator X Max for 4.6 DOHC with 4R70W for sale. My system is a 1 year old 550-1318 setup, complete with newly replaced O2 sensor. I'm including the 2 low dollar pressure sensors with it as well as everything needed to convert it to GM IAC if you want. Everything works, the wires are not hacked or anything. I'm running a 6R80 now and the holley can't control it. $2200 plus insured shipping takes it all.

Used 1 time for testing Alfano 6 1t for swift Micro or Mini with new 1 pipe used 1 time also with temp sensor. $450
11/28/2023

Used 1 time for testing Alfano 6 1t for swift Micro or Mini with new 1 pipe used 1 time also with temp sensor.
$450

For sale $800 total shipped on both
11/28/2023

For sale
$800 total shipped on both

I got some race items for sale in good condition and selling at affordable prices. Pm me for more details if you’re inte...
11/28/2023

I got some race items for sale in good condition and selling at affordable prices. Pm me for more details if you’re interested.

So after a little more digging the the motor is a 380 sbc! It’s a 400 block with a 350 crank and bored 40 over very heal...
11/28/2023

So after a little more digging the the motor is a 380 sbc! It’s a 400 block with a 350 crank and bored 40 over very healthy 4-7 swap cam old school AFR 190 heads sold truck as a roller have no need for the motor $3200 obo

AFR 210 SBC heads Part number 1103, competition CNC porting. Heads are 2 years old. Never damaged. They were just picked...
11/28/2023

AFR 210 SBC heads Part number 1103, competition CNC porting. Heads are 2 years old. Never damaged. They were just picked up from being freshened by Siebert Performance and are ready to bolt on and run. Comes with studs, guide plates, Crane 1.6 roller rockers with adjusters and locks as well as AFR stud girdles. Valve springs set up for up to .750 mechanical roller

Included is an Edelbrock 2925 super victor 4150 single plane intake manifold that was on on top of these heads. Will ship on buyers dime shoot me a message located in NC asking $1500

Address

North Arlington, TX

Website

Alerts

Be the first to know and let us send you an email when Pocket Card Slab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category