High Side Fabrication

Directions Contact the business

High Side Fabrication Racecar Fabrication And general repairs and fabrication to a wide variety of almost anything.

As the racing season winds down, we’re gearing up for rebuild season! If you’re planning on getting a new body for the u...
10/15/2026

As the racing season winds down, we’re gearing up for rebuild season! If you’re planning on getting a new body for the upcoming season, please reach out and let us know. We want to make sure we order enough materials to keep up with demand and have everything we need to build your bodies.
No payment is required until pickup! We just ask that you let us know if you’re planning to order so we can get an accurate count and order enough materials ahead of time. We can also install them if needed.

We appreciate your continued support and look forward to helping get your cars ready for another season at the track.

Not always the best at keeping up with posting, but I’m working on getting better at sharing the projects I’ve been work...
10/15/2026

Not always the best at keeping up with posting, but I’m working on getting better at sharing the projects I’ve been working on!
A couple of weeks ago, finished up some work on this Crown Vic removing and replacing the old accident-damaged cage with a new one and reinforcing it for added strength and safety.
Also repaired a Hobby Stock after a collision, straightening the frame, building a new front bumper, and installing a new rear bumper and rear kicker.

Recently finished up this custom roof truss attachment for a telehandler or bobcat. Designed to make setting trusses saf...
09/14/2026

Recently finished up this custom roof truss attachment for a telehandler or bobcat. Designed to make setting trusses safer, faster, and more efficient.

Haven't posted much lately because I keep forgetting to post. 🫠 We've finished up a few projects over the past few week...
07/13/2026

Haven't posted much lately because I keep forgetting to post. 🫠 We've finished up a few projects over the past few weeks, and here they are!

First, we replaced the front bars and mounted an aftermarket radiator in a Crown Vic. Then we built a Hobby Stock bumper. To finish it off, we fully assembled and welded in a Crown Vic cage, along with installing the necessary new safety bars.

Finished two stock car bumpers. One front and one rear. Also repaired two hobby stock bumpers one front and one rear.
06/08/2026

Finished two stock car bumpers. One front and one rear. Also repaired two hobby stock bumpers one front and one rear.

2 more hobby stock bumpers ready for battle.
05/18/2026

2 more hobby stock bumpers ready for battle.

Customer request newly designed bumper ready to hit the track.
05/11/2026

Customer request newly designed bumper ready to hit the track.

3 Crown Vics in 3 days. We started by adding the necessary new bars according to the rules and decided to add some of ou...
05/08/2026

3 Crown Vics in 3 days. We started by adding the necessary new bars according to the rules and decided to add some of our own safety features as well. We added 2 bars to the door bars, gussets, and a door plate per the new rules. Then we went ahead and added a bar connecting the two front main cage posts together, along with a gusset tying it all together. Also fixed and added a few other bars we suggested to help ensure safety.

We added a few bars to one car where the B-pillar was, along with another bar behind the driver connecting the X together. On our last car, we reinforced the front bumper by adding two hoops.

Another trailer in the books, can you tell we like building these? Just finished this 6’4” x 12’ utility trailer, built ...
05/06/2026

Another trailer in the books, can you tell we like building these? Just finished this 6’4” x 12’ utility trailer, built tough and ready to work. Constructed out of 2 1/2” x 2 1/2” x 3/16” angle iron frame, Expanded metal floor, Fully adjustable ramps, Full LED lighting, 2” ball hitch, 3,500 lb axle, 15” rims, Cleaned up with a sharp white finish Solid, reliable, and built to last.

Forsale $2,400 message me if interested!

Hobby stock body complete and ready for installation.
04/21/2026

Hobby stock body complete and ready for installation.

Address

3012 North State Highway 35
Norfolk, NE
68701

Website

Alerts

Be the first to know and let us send you an email when High Side Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to High Side Fabrication:

Shortcuts

Share

Category