The Diesel Ranger

The Diesel Ranger Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from The Diesel Ranger, Automotive Store, Ninety Six, SC.

Test fitting the cooling package. It's going to be a tough one.
11/02/2022

Test fitting the cooling package. It's going to be a tough one.

Possibly some weekend or next week shenanigans coming?
10/07/2022

Possibly some weekend or next week shenanigans coming?

Swapped over to the 09+ dodge T steering, next is a new gearbox and pitman arm, followed by sway bars and front crossmem...
10/07/2022

Swapped over to the 09+ dodge T steering, next is a new gearbox and pitman arm, followed by sway bars and front crossmember.

Stock turbo will fit but I'll have to relocate my evaporator core and drier. Any suggestions?I'm thinking plastic weld a...
10/07/2022

Stock turbo will fit but I'll have to relocate my evaporator core and drier. Any suggestions?

I'm thinking plastic weld a new case and vent, then plumb new extension lines.

Little update. Got to work on merging the two consoles together. Still need to sand smoother and paint. But it's sturdy.
10/06/2022

Little update. Got to work on merging the two consoles together. Still need to sand smoother and paint. But it's sturdy.

Vapid Sleipnir is just a meme name. Vapid is not owned by us, but instead is in a video game, GTA. The game uses paradox...
09/13/2022

Vapid Sleipnir is just a meme name. Vapid is not owned by us, but instead is in a video game, GTA. The game uses paradoxical names for big businesses and corporations. In this instance Ford is represented by Vapid.

Sleipnir was inspired by the 6-legged horse that belonged to Odin. This is just meant to fall under the horse themed names Ford provided its vehicles such as Mustang and Bronco.

If you have better or more fitting horse themed names, please share as we've done little research into this.

This is just a render, but we picked up a 2004 mustang hood, will be graphing the scoop and fake vent into the Ranger ho...
09/13/2022

This is just a render, but we picked up a 2004 mustang hood, will be graphing the scoop and fake vent into the Ranger hood, while also removing the mid section valley.

Ordered and installed a "Raptor" styled grille and installed an Affordable Off-road Bumper up front. We also installed l...
09/13/2022

Ordered and installed a "Raptor" styled grille and installed an Affordable Off-road Bumper up front. We also installed later model Chevy clearance cab lights. We have a locally sourced 12,000lb winch we will be installing once the front has been dressed up.

Took 2008 F-250 badges, filled in and made a custom vinyl decal with matching motor paint. We used a Dremel tool to cut ...
09/13/2022

Took 2008 F-250 badges, filled in and made a custom vinyl decal with matching motor paint. We used a Dremel tool to cut out the snap-pin locations out of the fender.

This will be a lengthy post to state all the parts used in the custom interior.Parts Used:- 2009 Mustang Dash- 2009 Must...
09/13/2022

This will be a lengthy post to state all the parts used in the custom interior.

Parts Used:
- 2009 Mustang Dash
- 2009 Mustang Console
- 2010 Explorer console box
- 2010 Explorer Shifter and cable
- 2002 Dodge 2500 4WD Shifter
- 1999 Explorer Seats
- 1999 Explorer Overhead Console
- 1999 Explorer Rearview Mirror (Auto Headlights)
- 1999 Explorer Lighted Visors
- 2008 F-150 Steering Wheel
- 1999 F-150 Multifunction Switch
- 2010 Ranger Interior Handles
- 2010 Ranger Illuminated Door Switches
- 1999 Mustang Auto window modules x3
- 2007 F-250 Dome Light with Map Lights
- 2007 Dodge Challenger HVAC K***s
- Intelliteonix Custom Cluster
- Custom HVAC Routing Tubes
- Modified 2000 Ranger Dash Subframe
- Redone Headliner
- Universal 3-Gauge Pillar Pod
- 69mm Gauges - Boost, Trans Temp, EGT
- Android 12 Double Din Radio
- JBL Door Speakers
- 2x Amps
- Custom Sub and Tool Box

Custom motor mounts were made and installed. The plan is to dress the radiator core support up and make the top section ...
09/13/2022

Custom motor mounts were made and installed. The plan is to dress the radiator core support up and make the top section removable. Radiators, fans and intercoolers will be installed in front of the support, behind the grill.

We have a later model, two speed electric fan to replace the mechanical fan off the Cummins. We will be altering the blower motor and evap box to accept the turbo and downpipe.

At this point the 5.9 Cummins, 47RE, and 241DLD are all mounted and clear without any firewall or trans tunnel modifications needed.

Also we modified some Chevy HHR shock mounts to install and hold the hood now without having to use the stock prop.

This motor was salvaged out of a 1996 dodge 3500. It has been gone through and upgraded. We went with a local off the sh...
09/13/2022

This motor was salvaged out of a 1996 dodge 3500. It has been gone through and upgraded. We went with a local off the shelf paint color, to dress it up a bit. The plan is to run a s363sxe Turbo for better spoll response.

Some upgrades so far:
#0 Fuel Plate
- full foward position
4k Gov Springs
60lb Valve Springs
425 Head Studs
191 Delivery Valves
5x14 Injectors
18° Timing

Address

Ninety Six, SC
29666

Website

Alerts

Be the first to know and let us send you an email when The Diesel Ranger posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category