Bulldog Trailers

Bulldog Trailers Being locally Owned and Operated out of Nevada MO. We are a manufacturer of Utility Trailers & More!

06/18/2026

NEW TRAILER ALERT!

06/18/2026

Just in time for Hay Season! Make sure your lot is stocked with Bulldog Trailers Hay Hound In-line Hay Trailer.

Call us to get your today 417-549-6992

5 SIGNS TO REPLACE YOUR TRAILER AXLES:1. The axle is bent or cracked. A bent axle tube is one of the clearest signs you'...
06/12/2026

5 SIGNS TO REPLACE YOUR TRAILER AXLES:

1. The axle is bent or cracked. A bent axle tube is one of the clearest signs you're looking at a replacement. Tubes bend when a trailer takes a hard hit: a wheel dropped into a deep pothole at speed, a curb caught at an angle, or an overload that bottoms out the suspension.

Before you judge a bend, know this. Axles are built with a little upward bow in the tube, called positive camber, that you can see when the trailer is empty. That's on purpose.Cracks are another matter. A crack in an axle tube is a stress fracture, and welding over it won't bring back the original strength of the steel. Keep running a cracked axle and you risk it letting go under load, which is how a tire ends up separating from the trailer at 65 mph.

A note on repair: yes, technically a spindle can be cut off and a new one welded on, and a bent axle tube can sometimes be straightened. Most shops, including ours, don't do either as a regular fix. Welding a new spindle onto a spring axle and getting it as straight and square as the factory tube is hard, and any small misalignment shows up later as uneven tire wear.

2. The same bearing keeps failing. Bearings fail on trailers. The first time one goes on an otherwise healthy axle, it's usually a maintenance problem.The second failure in the same wheel position is the one that should worry you. When a bearing keeps going in the same spot, the spindle is almost always the cause.

3. The tires wear unevenly across the tread. When the inside or outside edge wears faster than the middle, the axle has fallen out of alignment with the frame. Depending on which way it's tilted, that's either camber wear, where the tire leans in or out, or toe wear, where it points slightly left or right.

4. the trailer pulls to one side under a full load. If a trailer tracks straight empty but pulls to one side once it's loaded, the problem only shows up under weight, and that points to something structural. The axle is flexing differently loaded than it does empty, which usually means a bent tube, a cracked weld at a hanger, or a failed spring or rubber cord on one side.

5. The axle is old or has commercial miles on it. There's no set mileage where a trailer axle expires, but age and how hard it's worked both matter. An axle that's spent ten-plus years under a heavy commercial trailer, loaded near its limit every working day, has taken far more abuse than one on a trailer that goes out a few times a year. So, when an old, hard-worked axle starts showing any of the signs above, the math tips toward replacing it. A repair that compromises spindle alignment or weakens the tube at a bend is the wrong fix on a healthy axle, let alone one with years of heavy use.

Bulldog Trailers delivers high-quality, heavy-duty Equipment Trailers built for performance, reliability, and durability...
06/10/2026

Bulldog Trailers delivers high-quality, heavy-duty Equipment Trailers built for performance, reliability, and durability.

Call 417-549-6992 to find a Dealer near you.

NEW TRAILER ALERT!! Keep watching our page for updates on this Flat Deck Utility Trailer!
06/03/2026

NEW TRAILER ALERT!!

Keep watching our page for updates on this Flat Deck Utility Trailer!

Bulldog Trailers has the strength and durability to get it done.(417)549-6992
06/01/2026

Bulldog Trailers has the strength and durability to get it done.

(417)549-6992

BUILT TO WORK. BUILT TO LAST. Interested in becoming a Dealer? Call us today!417-549-6992www.bulldogtrailers-mfg.com1573...
05/26/2026

BUILT TO WORK. BUILT TO LAST.

Interested in becoming a Dealer? Call us today!

417-549-6992
www.bulldogtrailers-mfg.com
15730 S 1800 Rd Nevada, MO 64772

🚨 NOW HIRING: MIG WELDERS 🚨📍 Bulldog Trailers MFG – Nevada, MOBulldog Trailers is looking for dependable, hard-working M...
05/20/2026

🚨 NOW HIRING: MIG WELDERS 🚨
📍 Bulldog Trailers MFG – Nevada, MO
Bulldog Trailers is looking for dependable, hard-working MIG Welders to join our growing team! We’re looking for individuals who take pride in quality work and can keep up in a fast-paced manufacturing environment.

🔧 Requirements:
• MIG welding experience preferred
• Ability to read a tape measure
• Reliable and punctual
• Able to lift heavy materials safely
• Works well with a team
• Attention to detail and quality

💥 What We Offer:
• Full-time hours
• Steady work
• Competitive pay based on experience
• Family-oriented workplace
• Opportunity to grow with the company
If you’re ready to work and build quality trailers with a solid team, we’d love to hear from you!

📞 Call 417-549-6992

📍 Apply in person at Bulldog Trailers MFG – 15730 S 1800 Rd Nevada, MO

Address

15730 S 1800 Road
Nevada, MO
64772

Opening Hours

Monday 9am - 4pm
Tuesday 9am - 4pm
Wednesday 9am - 4pm
Thursday 9am - 4pm
Friday 9am - 4pm

Telephone

+14175496992

Website

Alerts

Be the first to know and let us send you an email when Bulldog Trailers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Bulldog Trailers:

Shortcuts

Share

Category