Hillside Cycle

Hillside Cycle Tires, service, electrical repairs
From Flatheads to M8's
40 yrs same location
(3)

Harley-Davidson Speed & Service Center
Professional Dyno Tuning, 2 Dyno's, 30 yrs
Walk-in retail counter
Complete machine shop/cylinder head shop
TorqueMaster Series Engines.

Typical day here;Headwork being done, a 132" M8 build, a hot 83" Evo, 1 M8 tuned, another on the drum, and a set of Evo ...
05/26/2026

Typical day here;
Headwork being done, a 132" M8 build, a hot 83" Evo, 1 M8 tuned, another on the drum, and a set of Evo cases that needed stud holes repaired.
Endless calls and emails/PM's, parts delivery and outgoing parcels, and walk in retail customers.
Other than that, we were just sitting around reading Easyrider.....lol.
Even that poor micrometer couldn't keep up....lol
Not made in China.🇺🇲
Scott

05/21/2026

121" CVO we built to a 153", locked and loaded on the drum this morning!!!!!
MadLad will be used.
Needs a Burns, but our great client wants to try the Khromeworks until the Burns arrive.
We be game for that.
Gonna' light up some serious torque!!!!!!!
Gonna' also wait for the neighbors to wake they asses up before we commence......lol!!!!!
Not made in China.🇺🇲
Scott

Saw this on another site...."Where dat piston go?".....lol!!!!Not made in China. 🇺🇲 Scott
05/19/2026

Saw this on another site...."Where dat piston go?".....lol!!!!
Not made in China. 🇺🇲
Scott

In honor, and observance, of those United States Armed Forces personnel, that gave the ultimate sacrifice protecting our...
05/19/2026

In honor, and observance, of those United States Armed Forces personnel, that gave the ultimate sacrifice protecting our great Nation, we will be closed Friday, May 22nd, thru Monday, May 25th.
God bless America!
Scott

Herm's 2024 Softail with his 131" crate engine, HPI shorty, is running stronger now!Thundermax tune by Kristoffer Palmer...
05/13/2026

Herm's 2024 Softail with his 131" crate engine, HPI shorty, is running stronger now!
Thundermax tune by Kristoffer Palmer on the areas newest, most accurate Dynojet dynamometer.
We tune every, single, day.
Not made in China. 🇺🇲
"The Masters of goin' Faster."
Scott

Ryan's 2025 Road Glide has some serious steam with only a cam/pipe/air filter!!!!Cycle Rama's new .574 cam, hits hard an...
05/10/2026

Ryan's 2025 Road Glide has some serious steam with only a cam/pipe/air filter!!!!
Cycle Rama's new .574 cam, hits hard and does not let go!!
Great professional installation by , and another pro tune by using the lastest in EFI tuning technology from Mad Lad Solutions.
These Gen II bikes run very well!!!!
Not made in China.🇺🇲
Scott

Jason's 2019 FLHX 131" finally came to us as per requested by the original owner to be tuned by us, after a Harley store...
05/07/2026

Jason's 2019 FLHX 131" finally came to us as per requested by the original owner to be tuned by us, after a Harley store bolted the 131" kit in place.......they denied that customers request, and sent it elsewhere.....lol, ending up with the 2 attempts shown on those lower dyno graphs......ouch.
Well anyway, we finally established a good running motorcycle for Jason, after all, picking up great initial gains right where you need it, and great hp gains also, when you want to twist it!!!
Professionally tuned by , and correct parts installed by .
Folks, don't let just anyone fool around with your bike, let the seasoned professionals here get it right for you the first time.
Call us for a consultation, and get on the schedule for fun, reliability, and no drama.
Doing daily, what others can't.
"The Masters of goin' faster".
Not made in China.🇺🇲
Scott

We perform headwork every single day here.Just a quick snapshot of some 110" heads ready for wash, and final assembly, t...
05/03/2026

We perform headwork every single day here.
Just a quick snapshot of some 110" heads ready for wash, and final assembly, then a series of checking procedures prior to the engine assmbly, for yet another one of our Sport-Touring 124"s for a long standing great client.
will break it in on our newest, and the areas most accurate #2 Dynojet dynamometer,(yes, we have 2) and then put a professional tune on it using world-class tuning software, MadLad Solutions.
30 years of dyno tuning experience here, and 40 years Veteran owned, building Harley-Davidson engines clearly speaks for itself, along with being recognized by leading industry piers, and clients worldwide.
Proudly ranked currently by Google as the region's #1 independently owned most comprehensive and complete Harley-Davidson motorcycle shop!!
"Central New York's #1 Harley-Davidson Speed and Service Center".
Not made in China. 🇺🇲
Scott

Address

5225 South Main Street
Munnsville, NY
13409

Telephone

+13154956650

Website

Alerts

Be the first to know and let us send you an email when Hillside Cycle posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category