Aaron Smith-Axle Surgeons Inc.

09/18/2026

Wanted to take a minute to show folks how to use a set of digital micrometers to check whether the spindle is in or out of specifications. This is the process I use and is in my opinion the cheapest as well as easiest way to verify. I use digital IGaging mics and most truck shops and heavy applications will only need a 2-3 inch mic as well as a 3-4 inch mic. Calipers usually will not have a deep enough throat to measure anything over 3 inches. Hope this helps anyone who has questions. Feel free to reach out with any questions thank you.

03/20/2026

My beautiful bride made this up for me. Thought it was pretty cool.

02/22/2026

1987 359 Pete 3406B 15 speed

Friend is selling the pre BS truck. Put 50k into it while operating it. Fresh overhead, bottom end fresh, stretched 2 feet with an updated Low air leaf suspension and the front end lowered to match. 3 axle alignment. New radiator, fresh AC and alternator. 15 speed behind a 3406B model. Solid straight unit. New steers, 85% drives, all hub piloted. New bumper and single headlights. New shocks and bags.

Any questions please ask Randy at 517-462-0411
Asking 35,000 obo

06/12/2025

IYKYK!! Love when they come out like that.

04/08/2025

Folks this is truly an unfortunate situation. I have no idea who repaired this housing however I will let you decide if you want your family driving by this. Not everyone can repair these housings. Please be careful. Oh and another fun fact, this was installed so improperly that the brake shoes would be outside the brake drum by an inch which definitely wouldn’t pass a DOT inspection.

04/04/2025

Had a rough ride on this one. Was back on the road 2 hours after I got done. Customer sure was glad they could get the load delivered on time. Always grateful.

12/25/2024

We would like to thank each and every one that has trusted us to keep your money makers on the road. Merry Christmas to all and Happy New Year’s everyone. Please be safe and don’t feed the Bears.

11/28/2024

In the spirit of giving thanks, we’d like to thank all of our customers for your loyalty and support. May this be a joyous Thanksgiving for all who make this holiday season worthwhile. Happy holidays!

11/20/2024

I know there are people looking for a great place to work.

We are looking to hire the following:

South Bend location: Heavy operator

Plymouth location: Heavy operator

Warsaw Location: Light duty operator/rollback

New Haven: Looking for a experienced person with extensive light duty operating experience to help establish and expand our light duty offerings in New Haven and Fort Wayne.

Look, here is the deal, It is beyond frustrating to find good help.

The last guy we hired said he could handle it cause he watched Highway through Hell on tv and knew what to expect...He didn't last a whole day.

We do work hard, we do work long hours. you are going to probably have to work when you would rather be somewhere else, I believe we pay enough to compensate for this. If you are serious stop in and see us or email a resume to [email protected]. Im not gonna talk pay on a facebook post so no need to ask. Pay will be determined by experience.

You have to be over 21, have a clean driving record and must be able to pass drug screens.
Heavy Operators need a class A CDL

Please share and help us get the word out.