IZZY Fabrication

IZZY Fabrication Top of the line offroad fabrication and parts sales. Everything from Shocks to turn-key prerunners!

07/09/2026

Izzy fab tutorial:
How to daily drive your Pre-Runner to work.

GMC came in for some repairs after tearing off a link mount, which snowballed a bit into a full rework of the 4 link. (...
06/09/2026

GMC came in for some repairs after tearing off a link mount, which snowballed a bit into a full rework of the 4 link. (Bare with me I didn’t take many pics 😅)
Frame was repaired, driver side shocks were damaged during the incident with shocks were repaired, and shops were replaced, and all four shocks were serviced . Frame plated with 1/8 4130 overlays, then new link mount installed with our TIG welded 4130 trailing arms and 7075 billet upper links.
The new 4 link set up led to new 4130 TIG welded shock mounts and clocking of bypass for better clearances.
Axle was on the narrow side for the full size application. Customer opted to upgrade to our standard spec 4” full float setup from which we had readily in stock.
2” x .120 DOM chassis lacing was added from from crossmembers all the way to the rear upper 4 link transferring loading evenly throughout the chassis and suspension points, as standard on most our builds.
New center bearing mount Incorporated into chassis leasing to complement the new two-piece drive line.
The frontend got a full prep and service.
Make some custom 17-4 stainless billet clevis’ since the original 3/16 plate units were bending pretty bad.
Did added a battery shutoff and cleaned up some plumbing. Some other odds and ends. Then just when we thought we were done..
We convinced ourselves we fried the ECM somehow someway, despite the battery being disconnected for pretty much the duration of its stay.
After a few days in a bunch of hours, scratching our heads. One rushed new ECM later.
Found out it was the viper alarm system killing the whole truck. Ended up getting the truck started. It was all happy. Did it again. Fixed itself when the customer came to pick it up..
Anyways, this was another fun one! We’ll be doing a bunch more on this one!
I’ll try to keep making a post about every truck that leaves here. I know I suck at it. (I feel like I always say that) 🤣
Thanks for all supporting us. We appreciate you guys!


You know what’s really annoying, when you F’ up mounting brakes. There was definitely a truck in my early days that I fu...
03/17/2026

You know what’s really annoying, when you F’ up mounting brakes. There was definitely a truck in my early days that I fu**ed up. Used some off the shelf s**t working with a budget. Ended up having issues. Maybe it was my fault for quoting it to do it within that budget and that manner but it wasn’t right. It was some 1/4” 4130 bracket you buy at kartek. I’ve definitely learned my lesson. Nowadays, we are fortunate enough to have the clients to have budgets to be able to do things to absolute perfect perfection. Or at least to the best of my ability🤷🏻‍♂️.
This is an example, Keiths pre-Runner worked great when I drove it, but due to some old motocross injuries and other reasons, he wanted the truck to be much easier for him to stop, and if you know, manual brakes and big heavy vehicles with big tires, it’s not like you have everything going for you. The decision was made to work with on some new stuff they’re coming out with.
We are very fortunate to work with Quinton over there and have him and his team take care of us and set us up with some bad ass stopping hardware.
It led to a complete redesign of his brake master cylinder assembly and pedal, as well as doing brackets in a certain manner that Alcon requested, which were big thick boys. Obviously fixtures are in order as we do with all our set ups nowadays, so these are what I came up with for the Alcon stuff and the finished product!
What do you guys think?! #4130

03/01/2026

Lincoln bio or something like that.
Send this to your buddy that sucks at fabricating.
❤️

Will it stop?😅
02/07/2026

Will it stop?😅

Well, we’re finally getting fully settled into the new facility. Man, do we have a lot of work to catch up on😅Nothing sp...
12/29/2025

Well, we’re finally getting fully settled into the new facility. Man, do we have a lot of work to catch up on😅
Nothing specific I have to show off for a post, but just enjoy some miscellaneous photos taken throughout the month of December! We’ll get to posting more specifically on individual builds coming soon!

I want to thank every single one of you that has been patient with us throughout this process. The acquisition of this property through our holding LLC was a huge learning process for us and we had no idea how long Commercial escrow really took… This has been an absolutely insane, stressful and time consuming transition. We are extremely grateful for all of you who support us. 2026 is going to be a good one!

We’re looking to add a few members to our ever-growing team at our new beautiful state of the art 12,000 square-foot fac...
12/05/2025

We’re looking to add a few members to our ever-growing team at our new beautiful state of the art 12,000 square-foot facility in Colton California.

We are only asking people to apply who have real experience and who are capable of a higher level of craftsmanship.

***These are absolutely not entry-level positions!

We have benefit packages available.

The shop is fully insulated and will have air-conditioning and heat by summer of 2026.

Weld manager position is only for high-level precision welders. Job will be about 1/2 welding, 1/2 management.

Fabricator position must be proficient in tube work plate work, suspension and chassis set up as well as sheet metal and knowledge of General fabrication tools.

Prep mechanic must be able to self manage and have experience working on high-level off-road vehicles as well as stock.

We also have other benefits, such as employee pricing on all products we manufacture and anyone we are dealers for and personal shop use once the relationship is established.

please follow directions only send resumes along with pictures of your Work displaying your craftsmanship to our email.
[email protected]

DMS and any other form will not be accepted. First step is seeing how you follow these instructions 👍🏻

11/27/2025

Our black Friday sale goes live at midnight!
It’s our only sale of the year, so don’t miss your opportunity!

The entire website is discounted 10% off. This includes everything we make as well as items from other manufacturers such as all will also be 10% off!

Thank you for everybody’s continued support. We appreciate every single one of you!
Happy holidays and we look forward to dialing you guys in with some bad ass parts!

Address

10809 Fremont Avenue
Montclair, CA
91762

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when IZZY Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to IZZY Fabrication:

Shortcuts

Share

Category