The Dub Shop

The Dub Shop Bringing VW's into the 21st century, 4 injectors at a time! In 2000, Fuel injection came into my life. The results changed my life! And The Dub Shop was born.

I built one up, spent about 2 years gathering all of the needed bits and pieces to complete my own install on a 1600cc engine. I have always had a passion for computers, electronics and cars; so this was the best of everything. A few iterations and a couple of years later, I decided to start putting kits together for others.

The belly of the beast 😄 Time to dive in again, hopefully the last time.
09/02/2026

The belly of the beast 😄 Time to dive in again, hopefully the last time.

Our Laser and compressor combo are going up for sale. Due to space constraints and not having 208 3ph already available ...
08/27/2026

Our Laser and compressor combo are going up for sale. Due to space constraints and not having 208 3ph already available in the new shop and the size of a phase converter big enough is out of the question.

The power source is 4kw (the largest I could get in the small frame 3' x 4' with passthrough for full sheets, weighs 2500lbs). The screw compressor/chiller combo is 20 bar (284 psi) at 50cfm with only 65 loaded hours on it (1000lbs).

Message me if you are interested and we can talk (Y)

First the fabricated stainless intakes, then the 3D printed Nylon, now 3D printed aluminum manifolds. I still need to we...
08/26/2026

First the fabricated stainless intakes, then the 3D printed Nylon, now 3D printed aluminum manifolds. I still need to weld the runners and tap the holes, but this is the way forward for my DBW throttle body kits! Oh man, so exciting 💪

Working on Comp-E Manifolds again, made some changes and need to make a couple more, but they are close. I need to model...
08/26/2026

Working on Comp-E Manifolds again, made some changes and need to make a couple more, but they are close. I need to model them with a back side b**g too (Y)

It's again and Bruk sent me a picture! His supercharged engine is in and it's almost time for a test drive 🤗
08/21/2026

It's again and Bruk sent me a picture! His supercharged engine is in and it's almost time for a test drive 🤗

Final PCB assembly on the next 10 Mini Cam Syncs. They will be available next week 💪
08/21/2026

Final PCB assembly on the next 10 Mini Cam Syncs. They will be available next week 💪

Another set of Mini Cam Syncs built up! We usually do 10 at a time, but 9 looks better😅
08/19/2026

Another set of Mini Cam Syncs built up! We usually do 10 at a time, but 9 looks better😅

Welp, call me the kettle😅
08/19/2026

Welp, call me the kettle😅

Just finished up this EFI conversion for a 1776 in a Ghia💪🏻 It will replace an older non programmable system. A few more...
08/12/2026

Just finished up this EFI conversion for a 1776 in a Ghia💪🏻 It will replace an older non programmable system. A few more to go and I'll have a clean slate again!

08/12/2026

Noisy Boy, our C02 laser is our slowest asset. He needs to be replaced 🥲

Address

17239 Tye Street SE, Ste E
Monroe, WA
98272

Opening Hours

Monday 10am - 5pm
Tuesday 10am - 5pm
Wednesday 10am - 5pm
Thursday 10am - 5pm
Friday 10am - 5pm

Telephone

+12064148456

Website

Alerts

Be the first to know and let us send you an email when The Dub Shop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Dub Shop:

Shortcuts

Share

Category