Spider Fabrication

10/15/2026

Maurice Whalen contacted me Tuesday night. I went out to his house Yesterday checked out his situation and he decided he wanted to move forward and hauled his truck to me yesterday afternoon and 24 hrs later his trucks ready for pickup. Had to remove all the air management along with wiring and redo it all. Here are some before and after pictures. Now he can confidently drive his Nissan Hardbody. Give us a shout with your fabrication and airride needs! (804) 517-7111

10/13/2026

Shewwwweeeeee Being a one man show can be harder and harder as I get older but today I wanted to test myself and I must say it was a success! Jacob dropped his Denali off yesterday and started it first thing this morning. Made the Spider fab harness and installed it, then I plumbed everything on the tank and once that was done installed it under the bed in the old spare tire location. I had to redo the spring packs removing the add a leaf and redoing the center pin and taking lift blocks out and doing new ubolts. Next was wiring up relays and pressure switches and valves. Then it was installing the weld on compressor brackets and upper bag brackets next I moved onto putting compressors and bags in. So I must say a one day turnaround is pretty good the trucks ready for pickup and onto the next!

10/08/2026

We also just finished up our customer Bretts 2019 Toyota Tacoma today. Has our basic up/down kit with dual viairs with watertraps, 5 gallon tank, dual 1/2" valves, weld on brackets, triple bellow bags, and all controlled with our spider fab wiring harness. Give us a shout if you'd like to get some professional installed airride! (804) 517-7111

10/08/2026

Haven't taken the time to post in a while we've been busy. But here's one we just finished up for our customer Maurice. His C30 has MMW uppers and lowers and drop spindles the rear has lowboy customs rear kit with watts link and gooseneck. It's all controlled by an airlift 3p system. Engine bay has hart fab inner tubs and the bed floor we did factory widened rear tubs and did ribbed floor notch cover. We also did a 2007 3/4 ton rear axle swap to give us disc brakes and narrow it enough to clear the rear fenders. So here she is bagged on 24s.

09/15/2026

Check out the waffle page!

1 OUT OF 15 CHANCE.......Here's another setup for someone looking to get bagged cheap! It's a 5 gallon tank, 4 half inch valves, dual chrome compressors along with all the fittings you'll need and has a custom red bull wrap with the silver compressor mounts to match. Let's do $50 a spot and 15 spots. Goodluck everyone! Comment below what number you'd like its first come first serve and once it's filled I will reach out and collect payments and find us a lucky winner!

1. Landon Edwards ✅
2. Justin Humphrey ✅
3. Stevie Phipps ✅
4. Maylon Oneal ✅
5. Kyle Austin ✅
6. Aaron Molinares ✅
7. Logan Crawford ✅
8. Logan Crawford ✅
9. Chris Lennier ✅
10. Landon Edwards ✅
11. Nate Allen ✅
12. Chris Lennier ✅
13. Matthew Steele ✅
14. Caden Cozart ✅
15. Kyle Austin ✅

09/08/2026

Griffyn Foster went with our 4 valve setup with 3/4 lines and weld on brackets on his 17 GMC Sierra. He wanted the Bud light theme setup with custom wrap and stands and we got him right! If you have any airride wants or needs give us a call @ (804) 517-7111 .

09/06/2026

Just finished up one of our lucky winners on Spider Fab Waffles. He won our all chrome kit and decided to get us to install it for him. Congrats again Hannum Brooks.

09/05/2026

Go check out the new giveaway page and have your shot at getting some cool products and even installations for a fraction of the cost. Give it a follow and Good luck everyone!

Giveaways......PAYMENTS ACCEPTED through Venmo, Cashapp, zelle, and Paypal

09/03/2026

Be on the lookout in the upcoming days for very cost efficient pricing for customers. We are going to start offering a cheaper line of products to fit your budget. Our elite products for customers still available for quality and durability.

08/20/2026

Just finished up Austin Keffers 2017 Silverado on 26s and 37s. We did our hopping kit on it. Had to rerun and redo exhaust to clear the passenger side back also we removed the helper leaf and did drop shackles to get it an inch off tire and aired up goes to level. So if there's something we can do for you give us a shout at (804) 517-7111.