XRM Motocross

03/27/2024

Looking around the shop this eavning and noticed how many different tools and different areas of crafts I have collected. I never really noticed it before becouse iam always busy working on somthing. From a simple tool kit, to Motorcycle tools, Machinist, Welding,wood working. Pretty much I can build anything I need. All started with my Dad letting play in the shop when I was a couple years old. Put a wrench in my hand and somehow I took the ladder of the chevy van when I was 3 or 4 years old. Thank you Mom and Dad.

02/05/2024

What to ride
1999 Suzuki RMX250
OR
2009 KTM 450xcw that needs rebuilding
Big decision to make

12/12/2023

05/10/2022

1998 RMX250 power valve. Machined a new guide.

08/18/2021

Crank case repair. Bearing retainer tabs broken off. We built the case up with weld and resurface on top and did a clean up pass on the bore and correct setback for bearing depth. Turned out perfect .

07/15/2021

Suzuki RMZ250 cylinder head resurfacing.

07/14/2021

07/09/2021

Couldn't see the tenths dial indicator even move. Perfection.

07/09/2021

105 supermini stroker crank. Rod failure due to crank case gasket leak and allowed air in ,ran super lean. Disassemble, inspected, cleaned and reassembled with new PRO X rod kit. Trued perfect less then .0001 of an inch.

02/20/2021

One modified clutch actuator. Machined a square on top of the shaft and threaded a m6x1 thread. Of course we used Ti bolt. Stock and .125 and .250 offset for clutch pull plates. 2005 RM250

07/14/2020

Reconditioned a 2004 rm250 cylinder head for a customer after a rod bearing failure

07/25/2018

2008 RMZ250 FRAME WITH A 2004 RM250 ENGINE.