FixUp Autoworkz

Call Directions Contact the business

FixUp Autoworkz DM me if you need works needs to be done on your car. Im ASE CERTIFIED TECHNICIAN. i dont have a shop but i can do the job on my garrage. I charge 100$ per hour.

2011 gmc Savana 2500 4.8lcustomer concern cylinder misfire on cylinder 1 and 4. customer change coil and plugs. did a r...
09/23/2026

2011 gmc Savana 2500 4.8l
customer concern cylinder misfire on cylinder 1 and 4. customer change coil and plugs. did a relative compression and found both cylinder had low compression. possible lifter roller issue and flat cam. recommending cylinder head removal

07/29/2026

2013 Hyundai elantra after changing the crankshaft position sensor.

2013 Hyundai ElantraIssue- stalling and cel will come on. scanned the system and has P0335 crankshaft position circuit...
07/29/2026

2013 Hyundai Elantra

Issue- stalling and cel will come on. scanned the system and has P0335 crankshaft position circuit a. hooked up my oscilloscopes and verified the signal is cutting out. recommend new sensor and verified the signal and its fixed.

07/28/2026

1998 Jeep Cherokee 4.0l
Check engine light on. clear it and it will comeback in 2 seconds when you start the car. scanned the system p0320 and p0340 code, no camshaft signal going to pcm. verified that theres power, ground and signal voltage are present hooked up oscilloscope and verified that the sensors are sending signal to pcm. (Compare to known good signal) pcm is bad. ( testing my new picoscope at thesame time)

07/28/2026

1998 Jeep Cherokee inline 6, 4.0l engine

cel is on P0320, P0340 no signal coming in to pcm. check power and ground are good. install labscope and verified that theres signal going to pcm.
recommending pcm replacement

07/25/2026

Car Technology.

06/24/2026

2014 Chevy Suburban PCM cloning.

05/28/2026

2019 Toyota Tundra. 4.6l
Customer concern, after driving for 30 minutes and park the car for 10 to 20 minutes it wont start. also sometimes driving on freeway it will stall. no codes aside from start ability code. he already take it to 2 toyota dealership and they cant figure it out. they replace all Injectors, and fuel pump. verified the concern. install mechanical fuel gauge and spark checker. when the issue happened fuel pressure is good. also theres a spark but not so bright. connect oscilloscopes on crank sensor while watching rpm. the power, ground and signal voltage are good on crank sensor. the crank sensor is sending square wave signal when the engine crank but the rpm is 0 or sometimes really slow. replace the pcm and fix the issue.

Address

Meridian, ID
83642

Telephone

+12084404903

Website

Alerts

Be the first to know and let us send you an email when FixUp Autoworkz posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to FixUp Autoworkz:

Shortcuts

Share

Category