Space Coast Speed and Custom

Space Coast Speed and Custom Space Coast Speed and Custom is your home for all performance motor builds. We also offer a full lin Gasket, MSD, N.O.S., Richmond, Russel, and many more.

We also offer a full line of parts in our in-house speed shop. Some of the brands we offer include: Autometer, B&M, Dart, Eaton, Edelbrock, Fel-Pro, Holley, Hoosier, Moroso, Mr. If we do not carry the specific part needed, it can be ordered and received within a day or two. We offer custom build levels from mild to wild, whatever your preference! Give us a call!

Got home about 5pm yesterday from our three day 1850 mile ride around the country. 8 states, one sweet drag strip, one n...
04/13/2026

Got home about 5pm yesterday from our three day 1850 mile ride around the country. 8 states, one sweet drag strip, one nice hotel room, one questionable hotel room, a 383 that has been stress tested, and mommas new SS Monte Carlo. Now she can cruise to the car shows with me in her own whip.

* I am looking for factory bucket seats for it. Red in color is a bonus.

Ready for assembly. Only took about two days of prepping them to get to this point. 455 poncho, 4xx lil m SBC and 383 sb...
04/07/2026

Ready for assembly. Only took about two days of prepping them to get to this point. 455 poncho, 4xx lil m SBC and 383 sbc crate engine.

Lil powerstroke O-ring action
02/23/2026

Lil powerstroke O-ring action

Super Series LS3 head on a Hartline built 427. This is at 13.6 lbs of boost. And this is RWHP. So you're looking at 1100...
01/18/2026

Super Series LS3 head on a Hartline built 427. This is at 13.6 lbs of boost. And this is RWHP. So you're looking at 1100 fwhp on a very safe low boost tune💪💪. Not some manufactured numbers. When you're ready to make a move that will make a difference call us and we can get you in the right direction!

Who needs a New Years deal? Customer ordered one too many sets and I don't wanna sit on them so someone is about to make...
01/13/2026

Who needs a New Years deal? Customer ordered one too many sets and I don't wanna sit on them so someone is about to make out! Superman Series LS-3 aftermarket 11° six bolt heads. Fully CNC ported version normally retails for $4350 plus shipping per set with upgrades (inconel/super alloy exhaust valves for boosted applications) and o ringed exhaust ports. These also have upgraded springs good to .710 lift. We will sell this set for $3950 and include shipping ANYWHERE in the US. Call 321-557-6150. THIS SET ONLY FOR THIS PRICE!

4.00" or larger bore (we recommend 427 cid or larger)
2.165 intake
1.600 ex
70cc chamber
PAC springs good for .710 lift
Titanium retainers480 thicker deck surface than factory.

Lifter bushings in a 440 Mopar
12/31/2025

Lifter bushings in a 440 Mopar

This "lil gangster" will wrap up 2025 for us at SCSC. Should be out the door, delivered tomorrow.
12/22/2025

This "lil gangster" will wrap up 2025 for us at SCSC. Should be out the door, delivered tomorrow.

HOLIDAY SPECIAL: We're currently assembling this "house" 383 that we plan on running in our street/strip Malibu but it i...
12/16/2025

HOLIDAY SPECIAL:

We're currently assembling this "house" 383 that we plan on running in our street/strip Malibu but it is also for sale if anyone is looking for a quality SBC with all new components ready to go with no wait time.

GM 4-bolt block. Thermaled, magged, CNC bored, torque plate diamond honed, square decked (-.005).

Eagle 4340 rotating assembly. 6" h beam rods. Mahle 5cc ft pistons with 1mm, 1mm, 2mm ring pack.

Comp 254/256 billet solid roller on 900bc
657/657 lift on 108

Morel lifters T&D shaft rockers AFR 210/220 CNC heads. Pac springs. 105 wall pushrods

Edelbrock Super Victor Intake. Moroso custom oil pan and pick up. Melling select pump.

This engine will be 10.85 to 1 compression and able to run on 93 pump gas. It will produce north of 600hp.

We can have it ready before Christmas 🎄. Price is $9950.00 intake to pan. Again this is a NEW 383 with quality parts, machined and assembled in house. Great for airboat, mud truck, crate engine, bracket racing etc. Call 321-557-6150 if you're interested.

This isn't our typical build at SCSC but like I mentioned earlier this year I'd like to focus some of my builds more on ...
12/03/2025

This isn't our typical build at SCSC but like I mentioned earlier this year I'd like to focus some of my builds more on "different" engines. Building the same bracket SBC, BBC or LS combo is ok but can get monotonous. This was an interesting, fun build. 345 ci international. Headed to Tallahassee , to install then to Louisiana.

96 valves, get to cutting boys 😂
11/28/2025

96 valves, get to cutting boys 😂

Customer- "I cant find a shop that balances diesel cranks, do you guys carry that much bobweight?" 6.7 powerstroke 3600...
08/28/2025

Customer- "I cant find a shop that balances diesel cranks, do you guys carry that much bobweight?"

6.7 powerstroke 3600 grams👀

Address

2100 Maine Street
Melbourne, FL
32904

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

(321) 557-6150

Website

Alerts

Be the first to know and let us send you an email when Space Coast Speed and Custom posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Space Coast Speed and Custom:

Shortcuts

Share

Category