B’s Fab & Tuning

06/12/2026

Coming soon! Stay tuned!

I’ve gotten many messages over the years regarding HpTuners. So it’s finally time to bring it on board 🫡

If you’ve messaged me in the past regarding hptuners, and still need help with it, go ahead and shoot me another message so I can get you in line!

06/07/2026

K24 swapped Ep3
220/190
45 degree vtc
4 piston oil pump

Seems we have a slight restriction with the exhaust. Clients gonna swap some parts around and see how much we pick up with different bolt ons 🤟🏼

06/05/2026

eBay turbo Lsv
Unknown turbo
9 psi
Rc 440s

250/217

This car had a very restrictive exhaust setup. Only revving to 7500 to keep it nice and conservative!

05/27/2026

2jz swapped G35 update!

Couple weeks ago I wired in two 12” spal pusher fans, wired the wideband into the canbus system on the link ecu, mounted the intercooler, & made custom 20an lines for the radiator. Next up is intercooler piping fabrication, then she should be ready for the rollers!
-powered by a 2jzge-nat (non vvti bottom end with arp rod bolts)
-Is300 vvti head
-LinkEcu
-wiringspecialties pro level harness
-90mm billet intake/TB (cable conversion for the G35 chassis)
-Top mount T4 divided turbo manifold.
-Psr gt3584 .84 Turbo
-Link Flex fuel sensor
-Bosch wideband knock sensors
-Twin disc clutch
-ID 1050cc injectors (limiting factor)
-Dual 525 fuel pumps in radium fuel pump hanger
- 8an feed line, -6an return.

She’s almost ready for all the summer activities 🫡

05/25/2026

This is what we run on our 2jz swapped G35 🤟🏼

The XtremeX is at the top of our G4X ECU range, with built in E-throttle and advanced features including Anti-lag, Paddle Shift Control and Traction Control.
- 8 Injector drives
- 8 Ignition channels
- 10 Auxiliary outputs
- 2 x CAN bus
- 512 Megabytes Data Logging
- 45 general purpose tables
+ So much more…

More info here: http://ow.ly/u1fz50LHZfq

Find a Link Reseller: http://ow.ly/kr1v50M1xy1

05/24/2026

B20v EF hatch
12.3.1 comp
S2 Tuner 1 cams
2.5” exhaust
Pump 92

196/149

05/08/2026

Bone stock k20z3
190/146

This car came in for a tune, found a massive fuel pressure issue. Ended up swapping out the Chinese fuel pump, for a genuine walbro 255. Also replaced the clogged fuel filter (couldn’t even barely blow through it) with a new inline joes racing fuel filter! She’s a happy car now 🫡

05/07/2026

B18c1
Tuner 2 cams
180/130
S300

05/05/2026

Rob’s ek is back in for some goodies! We’re installing a speedfactory copper exhaust manifold gasket, SF exhaust manifold stud kit, & also freshly built GearX synchro transmission from TransLab Performance Transmissions LLC.

We’ll also be preforming a transmission break in, to ensure maximum life out of the synchros

04/26/2026

Bone stock H22 Eg coupe
H22A4
Digidizzy
DTR header
Skunk2 intake

213/171
92 pump gas

Car was breaking up on the top end because of spark plugs. Other than that pretty solid numbers for a bone stock motor!