Stang parts N More

Directions Contact the business

Stang parts N More Stang Parts N More is your source for New and Used Mustang parts and More We accept Paypal, Zelle and Credit Cards directly for payment sources

UPR 8an Transmission Cooler Port Extension w/ TS180 Sensor 6R80/10R808an Transmission Cooler Port Extension w/1/8 NPT po...
10/27/2026

UPR 8an Transmission Cooler Port Extension w/ TS180 Sensor 6R80/10R80

8an Transmission Cooler Port Extension w/1/8 NPT port and TS180 Thermal Switch allows you add a thermal switch to your transmission cooler adapter with 8an lines. If you transmission cooler adapter doesn't have an 1/8 port this is an easy way to add one or if you have a single 1/8 port and want to add a second switch or sensor. Great for controlling your electronic cooling fans or for datalogging fluid temps.
Setrab Thermal Switches are used to activate a 12V accessory at a prescribed temperature.

They are a normally open switch, so once the prescribed temperature is met, they will activate and continue duty until reaching approximately 15°F below the action temperature.

180* F

1/8-27" NPT Thread

Spade Terminal Connection

Product Features:
» 8an Female In/Male Out
» 1/8 NPT Sensor Port
» Comes with Setrab TS180 Switch
» Easy way to add a thermal switch to your Port Adapter with no 1/8NPT provisions
» Black Anodized Finish

Fits These Vehicles:
6R80, 10R80 Transmission from 2011-2025 Mustang and F150 with existing port adapter that uses 8an male fittings.

Sku - 8202-16

Retail is $64.99 plus shipping. Sales tax applies in the State of Florida

Contact StangPartsnMore today for special pricing!

UPR Power Steering Pump Delete Kit with 9 Hole Pulley (fits 86-95 Mustang, SBF 289 302 351)Have you switched over to a m...
10/27/2026

UPR Power Steering Pump Delete Kit with 9 Hole Pulley (fits 86-95 Mustang, SBF 289 302 351)
Have you switched over to a manual rack or even electric steering rack on your small block ford? Our Billet Power Steering Pump Delete Kit replaces the factory pump with a complete billet assembly, which utilizes a billet pulley and double row, double sealed bearing for the ultimate in reliability. Pulley is stock diameter to retain the stock length serpentine belt.

Installs in 30 minutes or less. All necessary hardware included.

Product Features:
» Black Anodized Finish
» Power Steering Pump Eliminator Kit
» 30 Minute Installation
» Fits all 86-95 Mustangs
» Fits Small Block Ford 289 302 351 with Serpentine Belt
» Includes 9 Hole Pulley
» Heavy Duty Double Sealed Bearing
» High Quality CNC Machined Billet Aluminum

Fits These Vehicles:
1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 GT LX V8 302 Cobra Mustang Roush & Saleen Vehicles.
1986-1995 F-150 with Small Block Ford engine.

Does not fit Explorer and Mountaineer Small Block Ford engines.

Sku - 3017-06

Retail is $119.99 Shipped in the Continental United States. Sales Tax does apply in the State of Florida

Contact StangPartsnMore today for special pricing!

UPR Power Steering Pump Delete Kit with 5 Star Pulley (fits 86-95 Mustang, SBF 289 302 351)Have you switched over to a m...
10/27/2026

UPR Power Steering Pump Delete Kit with 5 Star Pulley (fits 86-95 Mustang, SBF 289 302 351)

Have you switched over to a manual rack or even electric steering rack on your small block ford? Our Billet Power Steering Pump Delete Kit replaces the factory pump with a complete billet assembly, which utilizes a billet pulley and double row, double sealed bearing for the ultimate in reliability. Pulley is stock diameter to retain the stock length serpentine belt.
Installs in 30 minutes or less. All necessary hardware included.

Product Features:
» Black Anodized Finish
» Power Steering Pump Eliminator Kit
» 30 Minute Installation
» Fits all 86-95 Mustangs
» Fits Small Block Ford 289 302 351 with Serpentine Belt
» Includes 5 Star Pulley
» Heavy Duty Double Sealed Bearing
» High Quality CNC Machined Billet Aluminum

Fits These Vehicles:
1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 GT LX V8 302 Cobra Mustang Roush & Saleen Vehicles.

Does not fit Explorer and Mountaineer Small Block Ford engines.

Sku - 3017-04

Retail is $119.99 Shipped in The Continental United States. Sales Tax does apply in the State of Florida

Contact StangPartsnMore now for special Sale pricing!

UPR Universal 4.50" VTA Breather Tank Satin SilverUPR Lightweight Spun Aluminum Vent to Atmosphere Universal Fit Breathe...
10/27/2026

UPR Universal 4.50" VTA Breather Tank Satin Silver

UPR Lightweight Spun Aluminum Vent to Atmosphere Universal Fit Breather Tank for your street or race engine. Designed to allow remote mounting of your engine breather away from the engine and exhaust. Comes with dual 12an ports to allow for high flow or can be restricted down with adapter fittings. Includes 4.5" rubber lined T-Bolt Clamp and Mounting Bracket. Internally baffled with splash guard for great oil control. Made from spun aluminum for a lightweight but effective solution for your race car when every lb counts. Can be used with or without a vacuum pump. Splash guard is easy to remove for cleaning and maintenance, drain plug in bottom of tank for draining. Can be used for Crankcase, rear axle or transmission vent.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED

Product Features:
» Dual 12an Ports
» 1 Quart Capacity
» Can measures 4.50" x 7.00"
» Lightweight Spun Aluminum
» Internal Baffle with Splash Guard
» 4" Rubber Lined T-Bolt Clamp with Mounting Bracket
» Improves Performance by venting crankcase pressure
» Satin Silver Finish

Fits These Vehicles:
Universal fit

Sku - 5048-1000

Retail is $249.99 Shipped in the Continetal United States. Sales tax will apply in the State of Florida

Contact us today for special StangPartsnMore pricing!

UPR Plug N Play 4.50" VTA Breather Tank Satin Silver (fits 11+ Mustang, F-150, Coyote Swap)UPR Lightweight Spun Aluminum...
10/27/2026

UPR Plug N Play 4.50" VTA Breather Tank Satin Silver (fits 11+ Mustang, F-150, Coyote Swap)

UPR Lightweight Spun Aluminum Vent to Atmosphere Universal Fit Breather Tank for your 2011+ Mustang, F-150 or Coyote Swap project. Designed to allow remote mounting of your engine breather away from the engine and exhaust. Comes with dual 12an ports to allow for high flow or can be restricted down with adapter fittings. Includes 4.5" rubber lined T-Bolt Clamp and Mounting Bracket. Internally baffled with splash guard for great oil control. Made from spun aluminum for a lightweight but effective solution for your race car when every lb counts. Can be used with or without a vacuum pump. Splash guard is easy to remove for cleaning and maintenance, drain plug in bottom of tank for draining. Can be used for Crankcase, rear axle or transmission vent. Comes with 10 feet of Continental Braided high temp oil resistant hose to allow mounting anywhere in the engine bay or can be cut down to fit.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED

Product Features:
» Dual 12an Ports
» 1 Quart Capacity
» Can measures 4.50" x 7.00"
» Lightweight Spun Aluminum
» Internal Baffle with Splash Guard
» 4.50" Rubber Lined T-Bolt Clamp with Mounting Bracket
» 10 feet of 5/8" Continental Braided High Temp Oil Resistant Hose
» 12AN to 5/8" UPR Plug N Play fittings integrated push lock hose ends
» Satin Silver Finish

Fits These Vehicles:
2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 Mustang F-150 5.0L Coyote Swap S197 S550 S650 Dark Horse GT500 GT350 Boss 302 Mach 1
Universal mounting - 2011-2014 Mustang normally mounted to the firewall. 2015-2026 Mustang normally mounted in place of the battery (battery relocation required, see UPR Sku #9005)

Sku - 5048-002

Retail Price is $349.99 shipped in the Continental US. Sales tax applies in the state of Florida

Contact us today to get yours at special Stangpartsnmore pricing1

UPR catch can special. Get with us for special pricing.
10/26/2026

UPR catch can special. Get with us for special pricing.

Get with us today for special discounts.
10/25/2026

Get with us today for special discounts.

UPR 6R80 10R80 Transmission Cooler Port Adapter 8AN w/Dual 1/8" NPTUPR 6R80/10R80 Transmission Cooler Port Adapter allow...
10/18/2026

UPR 6R80 10R80 Transmission Cooler Port Adapter 8AN w/Dual 1/8" NPT
UPR 6R80/10R80 Transmission Cooler Port Adapter allows the use of 8AN fittings to connect to a remote transmission cooler instead of using the stock lines and cooler. Adapter also has TWO provisions for a temperature sensor for your electronic cooling fans or for datalogging fluid temps. Fits both Mustang and F-150 versions of these transmissions.

Product Features:
» 8an In/Out Male
» 1/8 NPT Sensor Ports
» Fits both 6R80 and 10R80
» Makes for easy connections to remote Transmission Cooler
» Black Anodized Finish

Fits These Vehicles:
6R80, 10R80 Transmission from 2011-2026 Mustang and F150

Sku - 8202-15

RETAIL is $119.99 shipped in the continental US. Sales tax applies in State of Florida

Contact us direct at Stangpartsnmore for best internet pricing

Something New from UPR for the GM 78-88 G Body guysUPR Pro-Series™ Double Adjustable Upper Control Arms for 8.8 Rear (fi...
10/06/2026

Something New from UPR for the GM 78-88 G Body guys

UPR Pro-Series™ Double Adjustable Upper Control Arms for 8.8 Rear (fits 78-88 G-Body)

Chrome Moly Formed boxes that have been revised with a gusset to eliminate any flex or unwanted distortion from Ultra High Horsepower cars. We have also had additional Top and bottom Plate reinforcements that will now outlast even the strongest 7second 200MPH Drag Radial and Outlaw cars making in excess of 2500+HP. The 4130 Chrome Moly threaded adjuster system allows these bars to be fully in car adjustable on the fly or between rounds in the lanes. Setting your pinion angle just got so much easier that it can be done in just minutes. Hands down these are the Strongest Double Adjustable Uppers available for your G-Body in the industry. For use with Ford 8.8" Rear axle swap. Fully CNC machined and Tig welded in billet steel fixtures to ensure perfection. Our Silver Zinc Plating will withstand the Elements & Resistant Corrosion. Last but not least is our 7075 billet aluminum bushings and high strength performance alloy.


Installs in 1 hour. Hardware included.

Product Features:
» Pro Series Double Adjustable Upper Control Arms
» Exclusive New Reinforced Brackets
» Easy 1 Hour Installation
» For Use with Ford 8.8" Rear End Swap
» Double Reinforced Upper & Lower Housing Bracket
» Manufactured from Indestructible Heat Treated Steel
» Grade 10.9 12mm Hardware Included
» Silver Zinc OEM Style Factory Finish

Fits These Vehicles:
1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 Buick Regal Grand National GNX Chevrolet Monte Carlo El Camino Malibu Caballero Oldsmobile Cutlass Pontiac Grand Prix LeMans Bonneville.

Sku - GM-2001-02

RETAIL is $169.99 Shipped in the Continental US. Sales tax applies in the state of Florida

Contact us today for your special pricing!

10/06/2026

Contact us directly for pricing.

Address

Margate, FL
33063

Website

Alerts

Be the first to know and let us send you an email when Stang parts N More posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Stang parts N More:

Shortcuts

Share

Category

Nearby autos & automotive services

Other Automotive Stores in Margate

Show All