Hot Rod Rehab, LLC

Hot Rod Rehab, LLC We are Restoration & Custom Car Shop, with the ability to work on anything from Classics to Modern Rides.

We build safe & quality vehilces, the way you vision and use them. We like cars to have the reliablity as original or better. We also like to see cars used and enjoyed, so they have to perform, just as good as they look.

Well we got a special guest in the shop. This 64 Corvette, I did everything but the paint, seats, and conv top on over a...
06/12/2024

Well we got a special guest in the shop. This 64 Corvette, I did everything but the paint, seats, and conv top on over a decade ago. Second Restomod 64 we did back to back at the last shop I worked for. Was not a part unrestored or touched on this car at that time. Shout out to R S Richards Transports & Towing for picking the car up and taking extra care of it. We are tasked with freshening it up, checking it over, and getting it back on the road.

9 hours Later We made it to Triple Crown of Rodding.
09/07/2023

9 hours Later We made it to Triple Crown of Rodding.

So after building the first Procharger Belt Guard to follow the shape of the F1 Procharger, it came alittle too close fo...
03/16/2023

So after building the first Procharger Belt Guard to follow the shape of the F1 Procharger, it came alittle too close for comfort to the 73 Camaros Hood, but did not hit. (I had the procharger and a desired mock up shape from the customer, not the car to test fit)

Some design changes and had us some new parts to weld together. Made the cross shafts slide into holes this time rather then butt up against the side, for a much easier time assembling and welding

Now off to Powdercoat.

-If your not making Improvements to each one, why Even try?

11/24/2022

Hot Rod Rehab (Larry Ledger) shared a post on Instagram: "Happy Thanksgiving! There is so much to be Thankful for as the shop just turned 10. The realization that I am turning 40 next year, and that I have been working on cars for almost 25 years. I'm also fortunate enough to make a living doing so....

This was a fun project that was knocked out this week. Cory asked if I could build a exhaust that won't rust out and las...
09/11/2022

This was a fun project that was knocked out this week. Cory asked if I could build a exhaust that won't rust out and last longer then a couple years. Then added his idea to bring the exhaust out the bedside. So this is what we came up with for his little Toyota Tacoma.





After hitting the road at 6 this morning and a 9 round trip to 3s Chemicals in PA the 66 Comet Cyclone is back at the s...
07/20/2022

After hitting the road at 6 this morning and a 9 round trip to 3s Chemicals in PA the 66 Comet Cyclone is back at the shop and naked as can be. Thanks Trevor for all the help getting the paint and heavy body filler off. Tomorrow we will get it out the trailer, started prepping for Epoxy, plan for all the repairs needed, and the custom work to be done.

Well this project has always been worked in around others, so progress wasn't always the fastest. So the feeling to have...
06/28/2022

Well this project has always been worked in around others, so progress wasn't always the fastest. So the feeling to have the bed mated back to the cab was awesome. A little more wet sanding and buffing on the bed, paint the roll pan, and some minor details, its ready to hit the street again.

Thanks for the Fuel Link that allowed us to use the factory Guage with the new custom fuel cell.

A little reminder of the 66 Comet Cyclone looked like when it came into the shop and its current state @ 3sChemicals. Th...
06/17/2022

A little reminder of the 66 Comet Cyclone looked like when it came into the shop and its current state @ 3sChemicals. Thanks and the others helping strip it to a clean slate for us to bring it back to life. Follow along as this build comes together.

03/18/2022

Welcome back warmer weather, longer days, and first day of the year all the Shop doors were opened up.

So 17 years ago today I was given this welding helmet for my Birthday and it served me really well up till about 2 weeks...
03/03/2022

So 17 years ago today I was given this welding helmet for my Birthday and it served me really well up till about 2 weeks ago. Today seemed like a good day to go ahead and hang it up above the office and retire it. Its been there since the beginning of my welding adventures and got it right after I bought my First Tig welder that im still running on the regular. Every scratch, lens change, and battery was well earned! From Hobby to Full Time car Building, if I ever welded anything for you, it was done with that helmet.

We do alot of Complex Exhaust in the shop, and always looking for ways to speed things up. Shout out to Dallas for comi...
09/16/2021

We do alot of Complex Exhaust in the shop, and always looking for ways to speed things up. Shout out to Dallas for coming up with these awesome 3D printed Tangent Tools to lay out the cuts. These are about to get used ALOT!

Alittle metal work catching up on a Sunday. Shaved the gas door on this 2001 Chevy bed. Locked the shop door, turned th...
09/06/2021

Alittle metal work catching up on a Sunday. Shaved the gas door on this 2001 Chevy bed. Locked the shop door, turned the music up, and got to tig welding, then hammered and dollied nice and smooth.

Address

261 Oak Park Road
Madison, VA
22727

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+14342497447

Website

Alerts

Be the first to know and let us send you an email when Hot Rod Rehab, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hot Rod Rehab, LLC:

Shortcuts

Share

Category