Sleeper Designs

Home
United States
Las Vegas, NV
Sleeper Designs

Check us out on instagram as well
Sleeper Designs specializes in custom fabrication and CNC products for the car world!

Sleeper Designs was created by Seth Ingham as a way for him to create performance parts for his personal Toyota Supra and has now grown into a reputable supplier for intake and exhaust manifolds for the world of Supras. Seth continues to grow the business and hopes to take it from a part time side business to a full time venture in the near future. With the recent purchase of a HAAS VF-3 4-Axis CN

C Machine SD's product line continues to grow at a rapid rate extending its reach much further then the Toyota Supra world.

07/13/2023

Lots of shiny parts! Done in 2 ops.

07/11/2023

Always down for trying new things!

05/24/2022

Some exciting things going on over here. Haven’t had time to post much but we got a new machine! It paired with our custom tombstones and (24) delta vises means it is ready to rock production. The machine is a NHP5000. Videos to come!

01/26/2022

Knocks out a few of these 500mm tombstone bases. These end up being 8”x8”x32” tombstones when complete. We designed them with fixturing/vise plates to meet our needs.

09/25/2021

Let’s go Jaskol!

09/07/2021

Petty cool toolpaths of this vacuum jig we made. Who prefers to see all the toolpaths on billet parts?
-
-
-

08/27/2021

Would you just look at it! 🤩 We love the finish we are getting on our All Billet 2jz intake manifolds.

Which style of our manifold do you like more RMR or All Billet better leave a comment below!
-
-
-

08/26/2021

HELP!!

Alright instamachinists, we are looking for some guidance on what everyone is running for coolant these days! We are currently using 929 by ChemArrow but at $1300 a barrel and a 1.85 refractometer multiplier, we are just flat blowing through it! We previously used Monroe Primecut but always had bacterial and smell problems. It was about $1000 a barrel plus lasted way longer and was a 1.2 refractometer multiplier.
We generate our own RO water as the water in Vegas is extremely hard(400ppm) so we have good water for the coolants.
-
-
What we are looking for and what our main use is:
-Soluble Coolant
-Low Maintenance(long sump and bacteria resistant)
-Primarily cut aluminum, but do cut steel, stainless, and titanium as well.
-High finishes in aluminum and taping friendly is an absolute.
-
Please let us know what you guys are using, cost per barrel and source if you are in the US. We would be swapping (6) machines when we commit so the quantity is of decent size.
-

06/16/2021

FOR SALE!!!!
1997 Makino A77 Horizontal
Full 4th Axis
(2) 600mm Pallet Changer
10k Cat50 Spindle
(40) Tool Magazine
135gal Coolant
Shower Coolant
Through Spindle Coolant
Data server
Wireless network for loading programs
-
Also includes:
(1) 12” x 12” x 25” Tombstone(no vises)
(40+) Cat50 tool holders(no tools)
Renishaw Work Offset Probe
Manuals
Spare conveyor motors
Misc other spare parts
-
This machine has served us very well and is still producing parts currently. It does have a lot of hours and has its quirks for an old machine.
-
Asking price is $50k, we will load it on your truck. If we get asking price I will personally come out for two days once the machine is installed and up and running get your company producing parts(plus travel expenses if not local.)
-
Swipe to see photos of the machine and parts that are coming off the machine.
-
We are selling to make way for a new 5 pallet pool machine for increased production.
-
Please email us at [email protected] with any and all questions.

The machine is very heavy. Main body is 45,###lbs and the tool changer is 5,###lbs.

03/17/2021

First time running some titanium 6AL-4V, needless to say I tore up some tooling! This project was with Kevin .mfg locally in Vegas. The material is so gummy, and was just cooking the coating off the end mills. Of course this was a rush job over the weekend so we didn’t have time to get in the right end mills. Luckily we had some 7fl 1/2” end mills that did the trick. Was definitely running way too much SFM to start which lead to cooking the coatings and the material sticking to the end mills and bye-bye! But the finished part came out great! Sometimes you have to do what it takes to get a job done! Can’t show the whole part but enjoy the inside finishes!
-
-
-4v

03/10/2021

Blasting at full production over here at Sleeper Designs! The sound of machines running 15-17hrs a day is definitely a good one!
-
-

02/23/2021

Slowly swapping our intake manifolds to the new machines had been a serious process but well worth it for the results. Being able to use the simultaneous multi axis for surface finishing is a game changer for surface finish quality and speed in these runners! These have always been programmed and run on our 97’ VF3 so running them on brand new machines is a real treat!
-
-

Address

6925 Speedway Boulevard Suite C112
Las Vegas, NV
89115

Website

http://www.SleeperDesigns.net/

Alerts

Be the first to know and let us send you an email when Sleeper Designs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Sleeper Designs:

Shortcuts

Want your business to be the top-listed Autos & Automotive Service in Las Vegas?