Fastline Fabrication

10/03/2026

09/28/2026

We’re on the road to Trail Hero Trail Hero Amplified

09/13/2026

Low Center of Gravity (LCoG) build on ECGS axles with custom Dana 60 truss for full hydro 3” dia ram, just floating on 16” ORI STX Struts and 42” Mickey Stickies!

09/11/2026

09/10/2026

04/08/2026

Progress update on the MB7001-ES 4 Link Kit one of the JKU Builds. Crossmember MB3028 tie-in Vertical Downhill Weld with 1/4” fillets on 1/4” thick MB7001 Crossmember tied into Factory Frame 1/8” thick box tube: Miller 255 set at 18.2 Volts with 232 IPM using 0.035” ER70S-6 filler with 75/25 mix gas.
I had a 1/4” gap on my frame, so I made a 1/4” shim plate on the passenger side to keep the skid plate bolt bolts lined up for final assembly.
I’m posting this while I wait for frame/crossmember to cooldown for another HOT Pass.

02/04/2026