Black diamond diesel performance & fabrication

06/11/2026

Back in office!

Reach out to us by Phone or email if you have any questions or would like to get your vehicle scheduled in!

Email✉️: [email protected]
Phone📞: (575)222-4080

06/10/2026

What an experience this has been to say the least!!

Couldn’t be more pleased with how everything functioned and came together at the ! And most of all we’re extremely proud to be putting NM diesel Performance on the map!

First and foremost I’d like to thank our sponsors:



inductions




Alex Singh with Singhin’ Diesel Performance

for the shredder series 6.4 deck plate! Glad we could put a shredder back on the podium!
for getting this truck dialed in from one extreme to the other!
for the transmission that lasted all 3 events without any signs of ware or fatigue.

While our hopes were high of placing top 10 prior to the event, we knew we may be in the money after kicking off a 5.36 in the drag racing portion on Day 1 of UCC

Day 2 for the dyno our expectations were set slightly low, as we would have been pleased with anything north of 2k Hp. sent us a file which was fairly conservative and we threw a couple small kits of nitrous at it and were blown away with the 2728 HP number it made! Knowing we could have changed jet size and flashed a different file to go for more, we decided to hold off as we did not want to possibly hurt the engine and not be able to make day 3!

As many know sled pulling is not our specialty but we definitely came in swinging on the 3rd day of the competition with an impressive 348ft pull! (I’d say steve made up for DPC 2019 lol)

To finish the event we ended placing 3rd in the sled pulling portion and 3rd place overall! This being our first appearance at the big stage at UCC we couldn’t have been happier with how everything performed and held together! Having a good team and great company’s behind you sure make the difference!

Thank you for all the support!

-Black Diamond Diesel Fam
.6.7 .adam .6 @5.9noah_

06/07/2026

Sled pull time 😎

06/06/2026

06/06/2026

2728 hp!!!

06/05/2026

5.36 @ 137mph! Getting this truck figured out little by little!

06/04/2026

Little too much sauce!

Couple tweaks in the nitrous ramp, and suspension and we’ll go for another test hit!

06/02/2026

Reminder:

Our shop will be closed from June 2nd till June 9th. As we will be competing in the . We plan to be back at the shop Wednesday the 10th!

05/28/2026

Counting the days till ! We will be headed out next Tuesday, if you’re needing to get ahold of us from the 2nd - 9th of June please reach out via email @ [email protected] and we will get back to you as soon as possible!

Thanks again for being patient and understanding! Stay tuned!

05/19/2026

As many of you know, we will be competing in the here in a 16 short days!

At the moment we are all focused and determined to get this truck dialed in to be a top contender in the competition.

That being said, if you have been reaching out or waiting for your vehicle to be completed here at our shop we appreciate your patience and understanding. And as for the customers that have been calling the shop phone with no answer or no response by email, we haven’t forgotten about you and we will be sure to get you squared away. Thank you all for understanding!

And a huge thank you to our sponsors for helping us get the parts needed for this truck to make and hold big power 😎



inductions