Brookshire Kustoms

Brookshire Kustoms Auto related fabrication shop

My good friend brought his 55 Buick down for a bag job. We used 2 444 compressors, an .lift.company air tank, bags ...
10/01/2025

My good friend brought his 55 Buick down for a bag job. We used 2 444 compressors, an .lift.company air tank, bags on all 4 corners, and a little larrys 4 corner manifold setup. It turned out killer.

Jimbo and Rhi brought us their C10 for a narrowed rear end, inboard coilover 3 link setup with notch, mid length heade...
07/07/2025

Jimbo and Rhi brought us their C10 for a narrowed rear end, inboard coilover 3 link setup with notch, mid length headers, and exhaust. We also replaced some worn out front suspension parts, and added some lowering springs up front to get the truck sitting a little more level.

Romeo brought his 87 Monte Carlo in to swap out a worn out 4.3, and broken auto trans for a 5.7 lt1, and fresh turbo 350...
04/24/2025

Romeo brought his 87 Monte Carlo in to swap out a worn out 4.3, and broken auto trans for a 5.7 lt1, and fresh turbo 350. We cleaned up the engine bay, tidied up some wiring, and added a sniper 2. Once it was running did some fine tuning on the sniper and got it running super clean.

04/07/2025

If any customers would like to go give a Google review for Brookshire Kustoms it would be greatly appreciated! Thank you!!

Eric brought us his 1955 Mercury Monterey for an air ride setup. In the front we made custom bag cups and plated the low...
03/15/2025

Eric brought us his 1955 Mercury Monterey for an air ride setup. In the front we made custom bag cups and plated the lower front control arms with products from and used RE6 bags from
In the rear we sourced a two link kit from
Air management is handled by two compressors, a Slam Specialties valve block from , and a seamless tank from .

Please give this a share! Thanks for your support!
01/09/2025

Please give this a share! Thanks for your support!

✨ Stickers available!! $3 each or 2 for $5! ✨ DM to order
12/10/2024

✨ Stickers available!! $3 each or 2 for $5! ✨
DM to order

Switch panel built for my buddy's F100.
10/23/2023

Switch panel built for my buddy's F100.

Kyle's Model A came to us as a rolling shell from . We added to finishing touches needed to get it on the road including...
12/02/2022

Kyle's Model A came to us as a rolling shell from . We added to finishing touches needed to get it on the road including... air management, wiring harness, fuel system, plumbing throughout, brakes, seat inserts and miscellaneous finish work.

Gevin's '62 C20 was brought to us as an abandoned project that needed alot of work. We converted it to half ton suspensi...
12/02/2022

Gevin's '62 C20 was brought to us as an abandoned project that needed alot of work. We converted it to half ton suspension, Z'd the frame, pocketed the lower control arms, installed a 5.3 ls and 4l60 transmission. Out back we removed the back half of the frame and replaced with 2x4 box, with a 4 link kit. This truck has been a great cruiser for him since the transformation.

Address

1744 12th Street SE
Largo, FL
33771

Telephone

+19047554784

Website

Alerts

Be the first to know and let us send you an email when Brookshire Kustoms posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Brookshire Kustoms:

Shortcuts

Share

Category