Modified by KC

Modified by KC Modified by KC (MKC Performance)

Race cars
Parts
Tuning
Fabrication MKC has been in Business since ".
(226)

In that time, the collective skills acquired by its participating members put the competition at bay. With numerous awards and trophies providing evidence of success; MKC continues to play an important part of the automotive community in the Kansas City area and in the surrounding districts. To find out more about the company see http://mkcperformance.com

HEMI Hump Day!!!This gorgeous '70 Plymouth Road Runner made its way in with a 392ci crate motor mated to a Tremec Transm...
06/03/2026

HEMI Hump Day!!!
This gorgeous '70 Plymouth Road Runner made its way in with a 392ci crate motor mated to a Tremec Transmissions TKX & wasn't running properly with the previous calibration. It was having some issues of excessively backfiring while decelling.
We did a baseline run, & could see it was running leaner than we'd prefer to.
We got the Modified by KC calibration dialed in via HP Tuners, & the byproduct was additional power as well.
We picked up an extra 31whp & 26wtq!💪
Vince is super pleased to get rid of the popping/backfiring while decelling, & no longer running lean

🟥 : Baseline : 416whp/448wtq
🟦 : MKC : 447whp/474wtq

🤳📱💻🤳📱💻🤳📱💻🤳📱💻🤳📱💻
Contact us at 913-432-8468 or [email protected] for all of your HEMI & Hellcat performance & service needs in the Midwest.
🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪
🐪

Honda Hump Day!!!This brand new Civic Type-R arrived with only 2700 miles on it to be outfitted with a 27WON Performance...
05/27/2026

Honda Hump Day!!!
This brand new Civic Type-R arrived with only 2700 miles on it to be outfitted with a 27WON Performance downpipe to a Private Label Mfg. front pipe to a Tomei Powered Inc. Expreme titanium catback. We mated up the Eventuri carbon charge pipe to the intake. Along with the carbon intake manifold from Drag Cartel Industries with a Spoon Co.Ltd. throttle body.
We dialed in the Modified by KC calibration via COBB Tuning AP3.

🟥 : Baseline : 316whp/322wtq
🟨 : MKC : 368whp/367wtq pulling timing due to poor fuel quality
✅️ : MKC : 351whp/355wtq : less boost & timing

🤳📱💻🤳📱💻🤳📱💻🤳📱💻🤳📱💻
Contact us at 913-432-8468 or [email protected] for all of your Honda performance & service needs in the Midwest.
🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪

This 2019 STi arrived with a GrimmSpeed FMIC kit, UELH, EBCS, DP, & COBB Tuning Redline intake, along with a Borla Perfo...
05/22/2026

This 2019 STi arrived with a GrimmSpeed FMIC kit, UELH, EBCS, DP, & COBB Tuning Redline intake, along with a Borla Performance catback exhaust.
We got the Modified by KC calibration dialed in via COBB Tuning AP3.

🟦 : S : 91oct : 295whp/301wtq
✅️ : S # : 91oct : 308whp/344wtq

🤳📱💻🤳📱💻🤳📱💻🤳📱💻🤳📱💻
Contact us at 913-432-8468 or [email protected] for all of your Subaru performance & service needs in the Midwest.
🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸

This sleeper wagon came in with a JDM EJ20Y swap at 160k miles. This Outback XT was still retaining the OEM intake, with...
05/21/2026

This sleeper wagon came in with a JDM EJ20Y swap at 160k miles. This Outback XT was still retaining the OEM intake, with an aftermarket downpipe as the only mod done.
We got the Modified by KC calibration dialed in via a COBB Tuning AP3.

🤳📱💻🤳📱💻🤳📱💻🤳📱💻🤳📱💻
Contact us at 913-432-8468 or [email protected] for all of your Subaru performance & service needs in the Midwest.

🌐 www.mkcperformance.com
📹 www.youtube.com/user/kcevo50
📬 5900 E. Connecticut Ave.
Kansas City, Missouri 64120
✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️

This 2024 WRX Limited came in for a new aluminum turbo inlet from Overtakeusa We mated an AMS Performance intake to it, ...
05/15/2026

This 2024 WRX Limited came in for a new aluminum turbo inlet from Overtakeusa
We mated an AMS Performance intake to it, & headed to the Dynojet Research Inc. 424x to get the Modified by KC calibration dialed in via COBB Tuning AP3.

🤳📱💻🤳📱💻🤳📱💻🤳📱💻🤳📱💻
Contact us at 913-432-8468 or [email protected] for all of your Subaru performance & service needs in the Midwest.

🌐 www.mkcperformance.com
📹 www.youtube.com/user/kcevo50
📬 5900 E. Connecticut Ave.
Kansas City, Missouri 64120

✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️✅️

05/14/2026

Throwback Thursday!
This minty 67 Fastback Mustang made its way in with a Gen2 Coyote swap done, & a Roush Performance supercharger attached to it.
It had some drivability issues, & we found that the builder had both of the primary O2 sensors on one set of the headers on the drivers side only. One in a single runner, & the passenger side in the collector. We moved it to the passenger side where it belongs, & moved the drivers side in the collector rather than the single runner where it belongs. Then we dialed the Modified by KC calibration in via HP Tuners

✅️ : MKC : 573whp/478wtq

🤳📱💻🤳📱💻🤳📱💻🤳📱💻🤳📱💻
Contact us at 913-432-8468 or [email protected] for all of your Coyote, Predator, & VooDoo performance & service needs in the Midwest.

🌐 www.mkcperformance.com
📹 www.youtube.com/user/kcevo50
📬 5900 E. Connecticut Ave.
Kansas City, Missouri 64120
🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸

Throwback Thursday!This minty 67 Fastback Mustang made its way in with a Gen2 Coyote swap done, & a Roush Performance su...
05/14/2026

Throwback Thursday!
This minty 67 Fastback Mustang made its way in with a Gen2 Coyote swap done, & a Roush Performance supercharger attached to it.
It had some drivability issues, & we found that the builder had both of the primary O2 sensors on one set of the headers on the drivers side only. One in a single runner, & the passenger side in the collector. We moved it to the passenger side where it belongs, & moved the drivers side in the collector rather than the single runner where it belongs.
Then we dialed the Modified by KC calibration in via HP Tuners

✅️ : MKC : 573whp/478wtq

🤳📱💻🤳📱💻🤳📱💻🤳📱💻🤳📱💻
Contact us at 913-432-8468 or [email protected] for all of your Coyote, Predator, & VooDoo performance & service needs in the Midwest.

🌐 www.mkcperformance.com
📹 www.youtube.com/user/kcevo50
📬 5900 E. Connecticut Ave.
Kansas City, Missouri 64120
🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸

Still continuing with more CTS-V's, this third gen made it's way in for a Stainless Works catback system. We'll see it ...
05/13/2026

Still continuing with more CTS-V's, this third gen made it's way in for a Stainless Works catback system.
We'll see it back for additional mods a little bit later on.
🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪🐪
Contact Modified by KC at 913-432-8468 or [email protected] for all of your LTX performance & service needs in the Midwest.
🌐 www.mkcperformance.com
📹 www.youtube.com/user/kcevo50
📬 5900 E. Connecticut Ave.
Kansas City, Missouri 64120
🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸

This super clean CTS-V coupe made its way in with a Dedicated Motorsports She Gone cam upgrade & the drivability was suf...
05/12/2026

This super clean CTS-V coupe made its way in with a Dedicated Motorsports She Gone cam upgrade & the drivability was suffering.
We outfitted it with a Stainless Works catback mating up the long tube Kooks Headers and Exhaust. We also checked out the installation of the DeatschWerks fuel pumps to ensure the level was staying stable. We made sure to cover up the access hole with a cleaner approach with the Radium Engineering cover.
We dialed in the Modified by KC calibration via HP Tuners RTD

🟦 MKC : 91oct : 13psi : 642whp/629wtq

Contact us at 913-432-8468 or [email protected] for all of your LSX performance & service needs in the Midwest.

🌮🌮🌮🌮🌮🌮🌮🌮🌮🌮🌮🌮🌮🌮🌮
🌐 www.mkcperformance.com
📹 www.youtube.com/user/kcevo50
📬 5900 E. Connecticut Ave.
Kansas City, Missouri 64120
🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸🏁🇺🇸

HEMI Hump day!This 2021 RAM 1500 Limited came in with a camshaft upgrade, along with an S&B Filters We got it dialed in ...
05/06/2026

HEMI Hump day!
This 2021 RAM 1500 Limited came in with a camshaft upgrade, along with an S&B Filters
We got it dialed in with the Modified by KC calibration via HP Tuners after performing our in-house PCM unlock service

🟧 MKC : 91oct : 341whp/352wtq

Contact us at 913-432-8468 or [email protected] for all of your HEMI & Hellcat performance & service needs in the Midwest.

🌐 www.mkcperformance.com
📹 www.youtube.com/user/kcevo50
📬 5900 E. Connecticut Ave.
Kansas City, Missouri 64120

🐪

Address

5900 E. Connecticut Avenue
Kansas City, MO
64120

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm
Saturday 11am - 3pm

Telephone

+19134328468

Website

Alerts

Be the first to know and let us send you an email when Modified by KC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Modified by KC:

Shortcuts

Share

Category