What are the opening hours?

Monday 8am - 5pm Tuesday 8am - 5pm Wednesday 8am - 5pm Thursday 8am - 5pm

ABF Fabrication - UTV and Offroad Parts.

Home
United States
Joshua, TX
ABF Fabrication - UTV and Offroad Parts.

Call Directions Website Contact the business

UTV Parts and Fabrication- Cage, bumpers, ect

11/05/2026

Quick disconnect b**g are one of many parts that may be equipped on your roll cage. These billet steel b**gs are machined to accept a variety of tubes and wall thicknesses, allowing the tube to sleeve over the joint while maintaining rigidity and structural soundness.

Whether they're on a bumper, dash, intrusions etc, they're a convenient and strong alternative that eliminates the need to permanently weld a joint in place. Combined with stainless hardware, not only are they strong, but also sleek, clean and streamline.

11/04/2026

👀Welds need structure…but can also be art!

We TIG weld our cages because we want comfort and control. Control of heat, control of puddle, and control of the finished appearance. There is faster ways to build, but the ART from TIG welding just takes it to another level. We are proud to show up close shots and we want you to know your cage is going to look even better up close than it does online.

So…ZOOM in, we don’t mind. The closer you look, the more you will like!

11/03/2026

👩‍🏭Weld quality starts before you strike the ARC.
Take a close look at these joints before they are welded. The tubes should fit tightly with no gaps, and have the full thickness of the tube at the joint. This gives the welder a consistent joint to work with, creates better pe*******on, and gives us the clean finished weld we are looking for. A beautiful weld can’t fix a sloppy joint.

Cage fabrication isn’t only about the welds. Make sure you understand exactly what is going on before the welds when choosing the right cage.

10/28/2026

Gotta love when fitup literally snaps in place!

Making easy work of these Can-Am Maverick R 4 seat sliders. They're going fast! Get em while they're hot 🔥

10/28/2026

“Fits both models” isn't always a benefit. Sometimes it means neither one fits as well as it could.

The XP4 1000 is roughly 64 inches wide while the XP S is roughly 72 inches wide. One centered tree kicker could technically fit both, but it would be too wide for one and too narrow for the other. ABF builds a separate design for each because we'd rather give both machines a 10/10 product than split the difference.

Go measure your XP S 4 and tell us if you think the 66.5 or or 72.5 width works best.

10/26/2026

🤦If you use an impact to tighten your roll cage bolts, you have already destroyed its strength.

Bolted joints on a UTV roll cage are a critical strength point. Simply giving it UGA-DUGA’s can stretch or damage the bolt. Once that bolt is stretched it will become the weak link for your cage. You don’t want that!

Don’t just guess at correct torque. Use the proper torque wrench and the proper specifications for the Vehicle.

10/23/2026

Your height alone says nothing about which roll cage you should buy.

Three people can be the same height and fit differently because of torso length, leg length, seat position, type of seats, helmet use, and desired headroom. ABF doesn’t simply take your roll cage order for granted…. We call and verify you will receive the right configuration that makes sense for you.

If your builder doesn’t ask for your height…find a new one. If your builder only asks for your height….. find a new one.

10/22/2026

😳Almost everything on IG looks good from 15 feet away. GET CLOSER!

Look at welds, tube fitment, gaps, cuts, and roof quality. ABF uses CNC equipment for the most accurate fit up and we aren’t afraid to show you close ups. What you see in ABF videos and posts is what you should expect when the product arrives.

Before you order from anyone, zoom in. If all you see is distant shots, ask for close-ups.

10/22/2026

🚫Offices are closed this Thursday through Sunday.

Destany and I are celebrating 20years and have taken some time off.

If you need to speak with someone please send us a text at 817-366-6110.

Have a great weekend everyone!

10/21/2026

🚫Spending thousands online and then hearing nothing for five weeks is a terrible way to buy a roll cage.

ABF gives multiple updates throughout the cage building process: Order confirmation, cut and bent, on the Jig, fabrication complete, and back from powder. Updates can also include photos of your actual roll cage. The goal is to answer the question before the customer has to ask it.

When you order a cage make sure to ask what communication you’ll receive after your card is charged.

Address

1401 South Broadway, Suite 103A
Joshua, TX
76058

Opening Hours

Monday	8am - 5pm
Tuesday	8am - 5pm
Wednesday	8am - 5pm
Thursday	8am - 5pm

Telephone

+18173666110

Website

http://www.abffabrication.com/

Alerts

Be the first to know and let us send you an email when ABF Fabrication - UTV and Offroad Parts. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.