Midnight Mojo Garage

Midnight Mojo Garage Jacksonville based car group. Helping the roadster community grow and build in north Florida.

02/23/2018

The dangers of using a racing seat with out the use of a hans device. be careful and always think twice when it comes to safety

Blog post  #2 Disassembly Well boys, it was time to take the soul from the Mazda.  Got an offer I couldn't refuse for th...
12/18/2017

Blog post #2 Disassembly

Well boys, it was time to take the soul from the Mazda. Got an offer I couldn't refuse for the clutch disk and pressure plate so it was time.

This was quick and easy, cut all of the wires and hoses that I knew I didn't need. Dropped the driveshaft and ppf and from there it was 4 bolts and 4 nuts and the engine was out on the cart being wheeled away.

To my surprise the bottom end of the block was still in pristine condition. The clutch and pp are on there way to a supercharged NB in VA and the 10 lb flywheel is for sale as well as the block as it sits. For the right price I will part ways with the 4.10 diff and put together a ford 8.8 but that's a whole post in it self.

In the mean time I decided to lower the shell back down on to the new ls1 going in, some trimming required but it's nothing too serious.

Big thank you to Kameron Wall for coming out and helping me on a Sunday!

Blog post  #1 -Intro. About 5 years ago I bought a friend of the families miata. Only owners were he and his Father, it ...
12/03/2017

Blog post #1 -Intro.
About 5 years ago I bought a friend of the families miata. Only owners were he and his Father, it ran great and I was handed a binder with every receipt for service since new.

Over time I replaced a lot of parts and eventually ended up with a relatively quick 1.8 miata. Slowly building the car to be able to handle more and more power. I wasn't even sure how I was going to get more power, along the way I had tons of people telling me to turbo it, or s/c it, "put a v6 in it" etc.. sure you pay for it was what I would say. After watching so many builds go from one set up to another 6 months down the road it just never made sense to me to dump money into it.

Eventually one morning on the way home, the little motor finally popped doing 65 mph on the freeway. 293k miles annnnd kabang. While walking home I started to form a solid plan. A Chevy LS motor was going to find it's way into the little baby miata, without a kit.

First thing I did was make a call back up north to a couple buddies. Located a mustang termi t56 that couldn't get into 3rd gear, easy fix, bell housing, input shaft and some synchros and were ready to rock. Next I found a L33 aluminum 5.3. Thought I was all set until cody cracked it open and found some melted mains. Little frustrated but most push forward. After scouring the LS pages I finally found someone in GA willing to part ways with their complete LS6 intake and ported TB. Eventually after searching with no luck I found a ls1 shortblock for sale and the seller worked with me on a price.

Ive gotten lucky so far and have gotten some great prices from old and new friends while collecting the new heart of the miata.
-150$ rough t56 out of a termi
-250$ aluminum 5.3 LS. (First engine i bought)
-375$ complete LS6 intake with ported throttle body, fuel rails, injectors and all sensors.
-250$ LS1 shortblock

The goal is to make somewhere around 400whp and drive ol girl into the sunset.
Sorry for the lengthy intro. From here on out it will be the fabrication of the build as well as keeping track of expenses and any hiccups we get along the way. This build is the brainchild of C&T Performance & Paint, Executive Auto Sport and Midnight Mojo Garage. With help from Buck Greenway, and the mad scientist himself Palmer.

Uh onloo
09/06/2017

Uh onloo

Runners trying to evade "zombies" and children eager to check out big emergency and service vehicles enjoyed some excitement Saturday at the Queensbury Central School District campus during the fourth

New stickers in stock!
02/02/2017

New stickers in stock!

Slaps are finally in as this is our first one we have a limited amount. However the guys here at MMG have already design...
01/10/2017

Slaps are finally in as this is our first one we have a limited amount. However the guys here at MMG have already designed 4 new slaps for everyone to enjoy hopefully to have prints made in the coming weeks! Be on the look out for previews and designs as we continue growing this year.

Armine's 99 twilight mica got a present today. Nrg short hub quick release and wheel. A very nice addition to the interi...
01/07/2017

Armine's 99 twilight mica got a present today. Nrg short hub quick release and wheel. A very nice addition to the interior!

without further delay here is Midnight Mojo's first Video. A daily weekday with T.R  and P.H. hope to have regular conte...
12/22/2016

without further delay here is Midnight Mojo's first Video. A daily weekday with T.R and P.H. hope to have regular content videos and Vlogs soon on our YouTube Channel so please give it a Subscribe to stay updated.

https://youtu.be/v1UeB7R_VU0

A regular weekday with Tyler Paul condensed into a 2 min clip of stupid.

Video Coming Tomorrow look for it!!
12/19/2016

Video Coming Tomorrow look for it!!

Address

Southside
Jacksonville, FL
32226

Alerts

Be the first to know and let us send you an email when Midnight Mojo Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share