K1 Built

K1 Built Automotive performance and fabrication for drift, drag, road racing, and street cars!

Little changes before fd Orlando. got us set up with a new heat exchanger with a fan, allowing me to route our intake o...
05/28/2025

Little changes before fd Orlando. got us set up with a new heat exchanger with a fan, allowing me to route our intake out into fresh air instead of in a hot pocket like in the past. Hoping to see much lower IAT's with this set up. All our pre event prep is finished up and we should be heading out shortly for Florida 🤘🏼

I've been somewhat radio silence the past few months. If you follow my personal page you saw a reel that hit home for me...
05/28/2025

I've been somewhat radio silence the past few months. If you follow my personal page you saw a reel that hit home for me of the last day in the hoschton location that was our home for ten years. We didn't close, we havnt quit...we've been quietly putting together a brand new facility to better serve you. A full reveal with details is coming soon as well as plans for an open house event. In the meantime, here's a small glimpse of the new shop.

Been getting this little rocket sorted for our buddy Pat. Full rebuilds on the drive axles yesterday, next up is full br...
03/28/2025

Been getting this little rocket sorted for our buddy Pat. Full rebuilds on the drive axles yesterday, next up is full brake service, timing belt and waterpump and some adjustable rear arms. If you've got a vehicle that's difficult to source parts for like this car and many others we regularly work on...drop us an email and let us help you get it sorted today!

2006 corvette in and out for some maintenance work. New LS7 clutch, rear crank seal, slave cylinder, remote bleeder, pil...
03/17/2025

2006 corvette in and out for some maintenance work. New LS7 clutch, rear crank seal, slave cylinder, remote bleeder, pilot and throw out bearing. Went ahead and installed a nice MGW short shifter while it was apart, and inspected the condition of the torque tube. These cars are getting older and in need of repair to keep them running and operating smoothly, shoot us an email to get on the schedule and get your corvette running smoothly!

Did some maintenance work on this lovely old Porsche today, couldn't pass up the opportunity to snap a photo of all thre...
03/06/2025

Did some maintenance work on this lovely old Porsche today, couldn't pass up the opportunity to snap a photo of all three of these European beauties lined up. Loving the influx of older European models I've been getting lately. Shoot us an email to get your classic running smoothly or ready for its next circuit day!

Installed a nice and simple exhaust and cold air intake on all road this afternoon. It's his daily but like most car g...
12/20/2024

Installed a nice and simple exhaust and cold air intake on all road this afternoon. It's his daily but like most car guys....we can't leave anything completely stock. Little bump in the sound and this cars just right. Shoot us an email to get them Christmas goodies installed!

Typically I work on the heavy circuit car stuff for my buddy but today I Installed some dynamic+ lowering springs on h...
12/03/2024

Typically I work on the heavy circuit car stuff for my buddy but today I Installed some dynamic+ lowering springs on his 2017 Audi all road. Got the car sitting just right for its road trip usage while providing a nice comfortable ride and keeping all the factory sensors and electronics happy. Shoot us an email for anything you need on your everyday cruiser 🤘🏼

Love when our customers send us photos of their cars in action! Here's Eric's s4 rally car ripping up an event recently....
11/28/2024

Love when our customers send us photos of their cars in action! Here's Eric's s4 rally car ripping up an event recently. We've done a good bit of fabrication and mechanical work on this car and look forward to better improving the platform with him for this purpose! Camera work by

Mercedes 190e in for some cage adjustments and suspension and brake work. Getting it dialed and ready for some circuit d...
11/01/2024

Mercedes 190e in for some cage adjustments and suspension and brake work. Getting it dialed and ready for some circuit days!

2007 Ferrari f430 came in for some bolt ons as well as some repairs. Put a new cat back exhaust system on to end the exh...
10/13/2024

2007 Ferrari f430 came in for some bolt ons as well as some repairs. Put a new cat back exhaust system on to end the exhaust rattle that plagues these cars, then pulled and rebuilt both drive axles. Drop us an email if you're looking for repair work on your aging Ferrari or just looking for some upgrades. We are happy to get you sorted out and back enjoying your vehicle.

A little suspension tuning on this brand new lotus emira. Remember guys, we do it all.
09/19/2024

A little suspension tuning on this brand new lotus emira. Remember guys, we do it all.

Nice and simple aluminized exhaust on this Chevy ls2 powered Exocet. 2.5 to a single 3" was a tight fit around the CTSV ...
03/22/2024

Nice and simple aluminized exhaust on this Chevy ls2 powered Exocet. 2.5 to a single 3" was a tight fit around the CTSV differential but we got it to fit up nicely. Excited to see what Kyle does with it upon finishing.

Address

5186 Cool Springs Road
Hoschton, GA
30506

Opening Hours

Monday 10am - 6:30pm
Tuesday 10am - 6:30pm
Wednesday 10am - 6:30pm
Thursday 10am - 6:30pm
Friday 10am - 6:30pm
Saturday 11am - 2pm

Telephone

+14437900076

Website

Alerts

Be the first to know and let us send you an email when K1 Built posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to K1 Built:

Shortcuts

Share

Category