09/17/2026
🚗🎨 How to Spray a Car DIY – Step by Step!
Ready to paint your car yourself? Here’s the basic process:
1️⃣ Wash & Degrease – Remove dirt, wax, grease, and contaminants.
2️⃣ Inspect & Repair – Find dents, scratches, and damaged areas.
3️⃣ Sand – Sand the old finish and feather the repaired areas smooth.
4️⃣ Body Filler – Repair dents and imperfections, then block sand smooth.
5️⃣ Primer – Apply the appropriate primer and sand until smooth.
6️⃣ Sealer – Apply sealer for a uniform surface before basecoat.
7️⃣ Basecoat – Spray even coats with proper overlap and flash time.
8️⃣ Clearcoat – Apply clear in controlled coats for gloss and protection.
9️⃣ Cure & Finish – Allow proper curing, then wet sand and polish if needed.
👉 Get FREE auto body & paint training: LearnAutoBodyAndPaint.com
🔥 Shop ATOM-X DIY & PRO Spray Guns: Zoolaa.com
