Jeep Superchargers

Jeep Superchargers We build and sell complete plug and play supercharger kits for Jeeps from 1997 and newer.

Thank you, Scott for sharing your thoughts on our kit and service!"My review for the TJ supercharger kit, I’ve had the k...
04/08/2021

Thank you, Scott for sharing your thoughts on our kit and service!

"My review for the TJ supercharger kit, I’ve had the kit on for 2 years now without one problem on a 4.0 with 125,000 miles on it. Kit was very straight forward to install and if you had any questions whatsoever you could call Mark over at BT and he would walk you through it. I’m from the Chicago suburbs so I didn’t really purchase the supercharger kit for higher altitudes or anything but for actually going 4 wheeling and taking it up to the Silver lake sand dunes in Michigan. And man the power difference is incredible on the sand which ya need more power than stock to really fly through the dunes. I’ve had multiple people come up to me at the dunes and asked if I had a Chevy small block in the jeep or even an LS and just responded with a supercharged 4.0 and they were amazed at what it could do. I’m writing this review for all the sand running I do with the keep and how it attests to how reliable this kit is, sand is all high rpm and works the motor and supercharger a lot more then just regular wheeling. The limiter is hit frequently and without care because it’s a reliable set up. Currently I’m running the regulars 5-6 psi pulley with the tune from BT but I’ve been talking to make abs recently just ordered some new stuff from them to get the boost to around 10-11psi for even more power on the dunes. So my jeep is running a Dana 44 front and dana 60 rear, 5.38 gears and a long arm kit with 37inch bead locks and the supercharger has no problem of pushing it up and down the dunes in 2wd. If you’re looking for more power in your jeep this is the way to go, if you have any questions just call Mark, he’ll clear everything up."

See more reviews at: https://www.boostedtech.com/reviews. And if you have one of our kits, please send us a review and pics/videos and we'll showcase your build!

If anyone with a 2000+ Wrangler wants to know how nudging of those AC lines should be done to clear our supercharger, ch...
07/16/2020

If anyone with a 2000+ Wrangler wants to know how nudging of those AC lines should be done to clear our supercharger, check out these photos from our most recent install on this 2006 LJ.

It took about 15 minutes and only a couple taps with a rubber mallet. Note that no lines are touching each other (very important for proper AC operation and to reduce possibility of wear), and note how the lines are still properly held in place by the bracket. (and no, the system never needed to be evacuated)

http://www.boostedtech.com

Well look what's on a journey to Colorado for some 'pony installation'...and will be getting quite the treatment!BT Top-...
06/30/2020

Well look what's on a journey to Colorado for some 'pony installation'...and will be getting quite the treatment!

BT Top-Mount Supercharger with full DAQ from Split Second, Medium Boost Pulley, Prosport Gauges Inc. AFR / EGT / BOOST gauges, Eculink.Cia.Ltda KNOCK monitor, 3-gauge Pod, a BT 62mm Bored Throttle Body, all polished off with some in-house custom tuning by our master tuner using HP Tuners!

http://www.BoostedTech.com

Complete install of AFR, EGT, BOOST, and KNOCK monitors!Your Jeep 2.5/4.0 doesn't have a factory knock sensor, so when y...
06/27/2020

Complete install of AFR, EGT, BOOST, and KNOCK monitors!

Your Jeep 2.5/4.0 doesn't have a factory knock sensor, so when you add forced induction and are more susceptible to knock, you either have to run very conservative timing, or risk engine damage.

Our newest product, the KnockLink G4 by LinkECU detects engine knock you can't even hear. This allows you to advance the tining for more power and better fuel economy without sacrificing safety.

See it here: https://www.boostedtech.com/superchargers/accessories/tuning/knocklink-g4-digital-warning-knock-detector/

If you have a supercharged (or even turbocharged) Jeep 2.5 or 4.0, this is a GREAT product to add. You bolt it to your engine block, and hook up power and ground, then mount the LED anywhere in sight. That's it! Call us, we'll walk you through it.

If you want to check out our other gauges, they are here: https://www.boostedtech.com/product-category/accessories/gauges/

When you can, you do!We've been keeping our 3D printers here very busy too, making Face Shields for a local charity for ...
04/08/2020

When you can, you do!

We've been keeping our 3D printers here very busy too, making Face Shields for a local charity for our local hospitals and our front-line workers.

If anyone in the Denver area needs a face shield, please let us know and we'll be happy to drive one out to you.

And if you can or want to donate to the campaign, here's the link: http://www.becausewecanfoundation.org/covid-19-personal-protective-equipment/.

Please everyone be safe out there!
-Your team at Boosted Tech

You spoke, and we listened. Our newest product released today:Toilet Paper Mega-Roll! (Prices start at $3,345.00)420 2-p...
03/14/2020

You spoke, and we listened. Our newest product released today:

Toilet Paper Mega-Roll! (Prices start at $3,345.00)

420 2-ply sheets
Safe for septic systems
Super Soft and absorbent
*includes Engine-Mounted Holder AT NO CHARGE!

Safe, reliable, affordable, ‘plug and play’ Low boost, instant boost, no lag Easy 3-4 hours typical install *4-7 pounds boost on the stock 4.0L Works and has been tested at all altitudes Utilizes a modified GM 3.8L Eaton M90 supercharger Rotor pack and nose drive are easily rebuildable Retains A...

03/05/2020

We took a bone stock TJ and slapped on a Boosted Technologies Supercharger. It put out 11 more HP than a stock 6 cylinder!

If you want a faster Jeep, come check us out at http://www.BoostedTech.com and feel free to call us any time if you have questions.

Now, it's off to KS Tuning for some more goodies!

1999 Jeep Wrangler 2.5 Turbo, built by a customer, using BT roller rockers, custom BT intake flanges/runners, and custom...
02/19/2020

1999 Jeep Wrangler 2.5 Turbo, built by a customer, using BT roller rockers, custom BT intake flanges/runners, and custom Boosted Technologies tuning solution.

02/11/2020

We didn't get a pic of the Jeep, but we'll let it slide!

"Thanks to Mark and Chris for the help with the tuning of the new supercharger. My 2008 Rubicon is really a beast now with the additional power added. I bought it primarily for pulling a trailer because the 3.8 is somewhat underpowered. I highly recommend this company for their product’s ease of installation and customer service. It is nice to know you can call on them locally to ask questions and do the tuning locally. Other companies have you send your ECM into them to get flashed. Mark can do it here in an hour or two. Nicest people in the business!"

When KS Tuning in Germany asks Boosted Technologies to pep up their 2.5 liter with our 2.5 L Gen 2 Superhcarger running ...
01/12/2020

When KS Tuning in Germany asks Boosted Technologies to pep up their 2.5 liter with our 2.5 L Gen 2 Superhcarger running 8 psi, we oblige!

She'll be finished, off to the dyno, and ready for delivery soon!

https://www.BoostedTech.com

Address

Highlands Ranch, CO
80129

Alerts

Be the first to know and let us send you an email when Jeep Superchargers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Jeep Superchargers:

Share