Ryannick Fabrication

Ryannick Fabrication Angle kits, control arms, air ride, fabrication, precision tig welding, cnc machining

Welding up some local work!
02/10/2026

Welding up some local work!

One thing we are doing is trying to get everything upgraded around here. When I started this, I had no intention of it t...
01/30/2026

One thing we are doing is trying to get everything upgraded around here. When I started this, I had no intention of it taking off. Now I cannot keep up, so automation is the only way. Getting a chip container built on the cnc knee mill, and we wrote a few programs to help speed up the s10 products!

Chevy 2500-3500, hummerH2s brand new set of RC forged tie rods. These are their biggest versions.. 130 shipped in the US...
01/13/2026

Chevy 2500-3500, hummerH2s brand new set of RC forged tie rods. These are their biggest versions.. 130 shipped in the USA, ext California

Working on programming ball joint cups, bushings, and bushing cups so we can be better for you guys. These are our bottl...
01/13/2026

Working on programming ball joint cups, bushings, and bushing cups so we can be better for you guys. These are our bottle necks, and they need to be sorted out. Eventually, even the tube bending will be cnc, but until then bare with us. We are working on cut fixtures that fit the band saw, and product documentation. My 13 YO will be taking over the ordering, photography and editing this year. After all, she will eventually be running this place, so she has to start somewhere.

This client walked in wanting a 4 cylinder ecotec intake with custom runner lengths that matched his dyno graph. It's a...
01/01/2026

This client walked in wanting a 4 cylinder ecotec intake with custom runner lengths that matched his dyno graph. It's all .125 and .250 aluminum.

We just shipped this kit out a couple weeks ago. For those still wondering, we still build s10 angle kits, and have not ...
12/30/2025

We just shipped this kit out a couple weeks ago. For those still wondering, we still build s10 angle kits, and have not stopped. Orders are limited to 10 orders per month. Nothing is automated, and everything is hand crafted. 10 orders per month is to insure quality doesn't drop. We offer track width extensions, up to 3in per side, 6in total. We center your wheel in the wheel well for 5in plus dropped trucks. Our tie rod relocation brackets are designed to not only give you more angle and quicker steering, but change your Ackerman. With the factory geometry the outside tire scrubs during drifting. The inside tire turns more than the outside tire to reduce tire scrub while daily driving. Our angle kits reverse that, and stop outside tire scrub. Track guys, we also build extended track control arms for auto cross. Bagged guys, we have control arms that allow you to lay frame on 22s. One other thing, the 78 camaro spindle is 2inches taller and utilizes the same wheel bearings. Running a camaro spindle will give you more camber curve and help hold the tarmac during high g force cornering.

CTSV 2 Craddles ......... 1.5in main tubes 95 wall, and 1in sub tubes 95wall. Everything will be tig welded and built to...
12/29/2025

CTSV 2 Craddles ......... 1.5in main tubes 95 wall, and 1in sub tubes 95wall. Everything will be tig welded and built to order. We were striving to be more productive, and trying to change things so we can turn everything faster. The problem is, the quality declines while quantity increases. I refuse to go faster in order to make more profit. Everything here will stay hand built, so if you want something now then order from a production shop.

Set of 2nd generation Ford lightning arms designed and built for a high end shop here in Michigan. We had the pleasure o...
12/29/2025

Set of 2nd generation Ford lightning arms designed and built for a high end shop here in Michigan. We had the pleasure of visiting this shop ourselves, and going over all their builds. Once these are installed and coated, he will be assisting us with a pre-sale. We will post more once everything is ready.

We now offer Crown Victoria swap arms up to 1.5 inches shorter per side, so 3in total. 4 inches arms are available, but ...
12/29/2025

We now offer Crown Victoria swap arms up to 1.5 inches shorter per side, so 3in total. 4 inches arms are available, but require users to modify their aluminum crossmembers. This particular set went to the outskirts of flint Michigan for a Ford torino. Everything is built to order,

We finished up a 6.2 silverado build. The customer is going to drop it back off late summer in order for us to build a s...
04/08/2024

We finished up a 6.2 silverado build. The customer is going to drop it back off late summer in order for us to build a silverado supercharger kit. We will jig it up, and build kits, these kits will come with a dyno sheet providing all the specs.

Address

Henderson, MI
48841

Opening Hours

Monday 3pm - 12am
Tuesday 3pm - 12am
Wednesday 3pm - 12am
Thursday 3pm - 12am
Friday 3pm - 12am
Saturday 9am - 9pm
Sunday 11am - 3pm

Telephone

+19894139665

Website

Alerts

Be the first to know and let us send you an email when Ryannick Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Ryannick Fabrication:

Shortcuts

Share