SEP Automotive

09/04/2026

The the final v5 rs6t design.. larger, lighter just all around better. These wheels were designed by us with a proper grade inconel alloy from scratch (we have the drawings). Units are officially in stock. & can only be found inside our turbos in the link below

https://www.sepautoproducts.com/products/rs6t-v5

09/04/2026

Never ends working ot to fill head orders

09/02/2026

Another built short block off to Illinois

09/01/2026

2018 Audi a7 in for oil cooler gaskets and oil filter housing / turbo

08/29/2026

Another stage 3 rs6 car that rolled in barely running, out of time, bad plugs, damaged lifters / misfire city. We took the bad components out and bam she will live to see another day and plenty of pulls next step calibrations. New lifters, new cam chains, new cam adjusters, polished cam shafts, plugs, timing belt drive, valve cover gasket & more.

08/23/2026

Danilo ripping his car MPACT Motorsports Festival this weekend right off the trailer. Only b5s4 there what a sound. Our short block putting in work.

08/22/2026

Hey everyone good morning / good afternoon! Often times we get a lot of questions on how to check or set tuner required wastegate pressure posted below is a great video that shows exactly hot to check / set cracking pressure. Now us and most company’s set preload prior to shipping, however it is always highly recommended for the end user to check post installation to ensure nothing got moved or adjusted during installation. We hope this helps with any installation of your 2.7t aftermarket turbo setup.

For the record
billet ko4 should be set to 8-9 psi

https://www.sepautoproducts.com/products/s-e-p-automotive-billet-ko4-025-26

Rs6t standard gate 11-12 psi

https://www.sepautoproducts.com/products/sep-auto-billet-rs6-turbo-charger-set

Rs6t Tial gates v5/4 18-19 psi

https://www.sepautoproducts.com/products/60mm-rs6t-8-blade-hybrid-with-tial-gates-18-psi-preload-spec

https://m.youtube.com/watch?v=9h9BuuFeAOI&ra=m

We use the MityVac MV8510 to manually test a turbo's wastegate.Tu...

08/19/2026

Julian Caprio I hear you like b5s4 and Tial 770 Xona? One block coming up for you sir.

08/17/2026

Two blocks for science / special ideas going down custom deck work to be revealed later this week John Allen Dobyan

08/13/2026

Our Enclosed catch cans, remove v***r far from the driver cabin and offer the ability to either recirculate the crank case air back to the y pipe using a factory pancake valve or dump to fender area far from reach of driver cabin. All while fitting behind oversized y pipes of any kind and mostly hidden. Fully baffled, aluminum construction, & all fittings and hoses sized for fitment making life easier for the diy guys.

https://www.sepautoproducts.com/products/s-e-p-auto-catch-can-with-vented-dump