Broken Silence Custom Car Audio

Broken Silence Custom Car Audio We are an automotive, motorcycle, and marine customization shop in Greenwich, CT specializing high q

Please email if you need us and I will respond as soon as I can!
06/03/2026

Please email if you need us and I will respond as soon as I can!

Super clean low mileage e46 M3 in for a sound upgrade. I somehow lost a bunch of pictures of the install but here are th...
06/02/2026

Super clean low mileage e46 M3 in for a sound upgrade. I somehow lost a bunch of pictures of the install but here are the ones I did have. We started out with a factory looking head unit to get modern features such as wireless Apple CarPlay. We 3D printed a mount to hold the Audison DRC MPCAN controller. The car was treated with several rolls of damping material. We added Voce ii component speakers in the factory door locations ran active on an 8 channel Forza amplifier. Audison Prima 4” coaxial speakers were installed into the rear locations on laser cut acrylic mounts. Lastly, we built a sealed enclosure that fits under the convertible top that holds 2 8” Hertz Mille Legend subwoofers that also serves as the amplifier rack. A trim panel was cut and upholstered in similar color trunk liner to factory and is held in by several magnets. Because the only way to get bass into the cabin is through the ski hole, we fabricated a custom grille with mesh on it allowing as much output as possible to get in. The DSP was tuned using a real time analyzer for optimal sound. Car sounded great when done, everything looks very factory and there is still room in the trunk for groceries!

05/21/2026

2 weeks from now I will be headed to in Arizona for 3 days of digital fabrication training so I can be more efficient at this 3D stuff. Here is a quick controller mount I designed and printed for a BMW we are working on.

05/06/2026

Best part is getting to listen to them when they are done!

05/06/2026

Another vehicle protected by IGLA

If you have called the shop or been in here in the past almost year, you have probably talked to Heather. Monday she sta...
04/23/2026

If you have called the shop or been in here in the past almost year, you have probably talked to Heather. Monday she starts her career as a 911 dispatcher. We figured a Costco tiramisu cheese cake was in order for her last day. Thank you for the help. We will miss you.

04/02/2026
2026 Raptor Bronco in for a complete audio overhaul. If you have heard how the factory sound is in a new Bronco, you kno...
04/02/2026

2026 Raptor Bronco in for a complete audio overhaul. If you have heard how the factory sound is in a new Bronco, you know it’s horrible. We started by completely gutting the interior and laying 12 rolls of damping material on the floor pan, door skins and door panels. The useless factory amplifier & subwoofer were removed and a mounting plate was fabricated to hold a Zen integration module, 5 and 6 channel Forza amplifiers. Mille Legend 3 way speakers were used in an active configuration for the front stage. Midbass drivers were mounted on acrylic plates in the factory location. We 3D printed pods for the dash that replace the factory grilles to hold the mid & tweeter. Mille Pro speakers were put in the new Raptor pods for the rear. Last but not least, a custom subwoofer enclosure was fabricated and secured to the tailgate housing a Hertz MPS300 shallow woofer. This Braptor now has an audio system to match the performance of the truck.

This 1970 Karmann Ghia came in for a much needed audio update. We started by fully stripping the interior and putting do...
03/22/2026

This 1970 Karmann Ghia came in for a much needed audio update. We started by fully stripping the interior and putting down a layer of damping material on the entire floor pan and both doors. We replaced the original carpet with a brand new fresh kit. The client wanted to retain as much of an original look as possible so we added a head unit as the source. A 3D printed face plate was fabbed to blend in better with the interior. Signal was then fed into an Forza 5 channel amplifier. We 3D printed a custom mount for the Audison control k**b as well as a USB charging port. This car originally had 1 speaker in the dash. We made fiberglass molds of the kick panels and added slim Carbon Nano speakers due to their ability to mounted in tight locations. We ran them in an active configuration so that the tweeter and midbass are individually powered. A subwoofer enclosure was fabricated in house to hold 2 8” Audison Prima subwoofers and he window for the convertible top was still able to fold in properly. We tuned everything using a real time analyzer and the car sounded fantastic & is now ready for summer cruising!

Do you own a classic vehicle and want to upgrade your audio system while retaining an original look?  We are now an auth...
02/11/2026

Do you own a classic vehicle and want to upgrade your audio system while retaining an original look? We are now an authorized dealer of who makes classic style radios with modern features including Bluetooth. We can combine one of these units with a digital sound processing amplifier & stealth speaker install so you can have modern sound without the modern look. Stay tuned for the 1970 Karmann Ghia we have coming in for an audio upgrade featuring one of these units! Car show season is coming!

Address

12 Livingston Place
Greenwich, CT
06830

Telephone

+12035699222

Website

Alerts

Be the first to know and let us send you an email when Broken Silence Custom Car Audio posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Broken Silence Custom Car Audio:

Share