Racing Sport Services

Racing Sport Services Motorcycle Sport bike haven Complete motorcycle service and repair shop. Our specialty is sport, road race, vintage and European motorcycles.

mock up photo , at this time the fab work is almost done. tank , sub frame done , the faring and new tag - tail light b...
05/29/2026

mock up photo , at this time the fab work is almost done. tank , sub frame done , the faring and new tag - tail light brackets are few tabs away .

Mean while back at the shop, 999 valve adj and belts, before installing in fresh powder coated frame. Triumph X pipe ins...
05/09/2026

Mean while back at the shop, 999 valve adj and belts, before installing in fresh powder coated frame. Triumph X pipe install requires a lot of effort including removing frame rails. Moto Guzzi because I like them. Cleanest 87 Slabby we have seen since 88. Carbs, The only way to really clean and rebuild carbs takes time and knowledge

Tank is very close . It does sit the way I want it to. We have bolted it in place. bungs are for quick release fuel fitt...
04/29/2026

Tank is very close . It does sit the way I want it to. We have bolted it in place. bungs are for quick release fuel fittings and the plate is for the level sensor. Ed is very patient helping me make my vision in to a real nice piece

Guzzi project moving forward
04/26/2026

Guzzi project moving forward

A look at my 2002 Guzzi V11 with out body work. I bought it new and really enjoyed riding this motorcycle Especially aft...
03/20/2026

A look at my 2002 Guzzi V11 with out body work. I bought it new and really enjoyed riding this motorcycle Especially after doing a whole lot of silly stuff to make it really fun at track days)
The rolling chassis, engine and suspension are already set up how I want them, it has a lot of upgrades and 1 off's. It is currently under construction to make it fit my body better. I should be posting some project pictures soon.

Did another frame up with lots of shiney new parts, a little motor help and carb repairs last summer but I did not mount...
02/24/2026

Did another frame up with lots of shiney new parts, a little motor help and carb repairs last summer but I did not mount the tank and other painted parts.Terry brought it back for its first service and carb tweeking . Quite a stunner fully clothed

Winter project bikes , there is still in and out stuff coming in from my die hard riders
01/23/2026

Winter project bikes , there is still in and out stuff coming in from my die hard riders

Fresh CBX Motor , New over size piston assemblies, bore, valve job and decked surfaces. Needless to say very time consum...
10/20/2025

Fresh CBX Motor , New over size piston assemblies, bore, valve job and decked surfaces. Needless to say very time consuming ,removing old stuck parts and gaskets, then getting the ring end gaps correct, then assembling a 24v 6 cylinder engine. Last getting correct valve clearances starting from a blank sheet
Thanks to Dave at Dutchman racing for the perfect cylinder boring , and Will Billy at engine services for the valve job and tipping the valves to keep it in normal shim sizes ! I frequent both because they get it right and deliver what I ask for.

Another great result from Barbor motorsports finals this year. Last year some competitors said they were "going to up th...
10/13/2025

Another great result from Barbor motorsports finals this year. Last year some competitors said they were "going to up there game " and they did but the guys still did well !
Philip said " Very thankful for all the efforts from the team this year. Thank you to Ricky Orlando for riding my Yamaha YZF 750 SP-2 at Barber Motorsports Park for AHRMA’s 2025 Vintage fest. Proud to say we finished the weekend with four podiums: 1st place and three 2nd place finishes. Want to thank my team for all their help this year and my sponsors GMD Computrack Atlanta, Vortex Racing, Podium Motorsports and Racing Sport Services".

GMD did a great job of getting the chassis set up with better forks and brakes for 2025 and over all support. The motor is the same one Philip ran last year with WERA and AHRMA #1's, built at my shop with only a valve adjustment and fresh oil since 2024. It is a true 750cc motor with a lot of YEC parts competing against some larger displacement machines. Great chassis and rider with a strong 750cc motor = Podiums

a few of the more notable projects in the last month
07/28/2025

a few of the more notable projects in the last month

Address

2210 Browns Bridge Road
Gainesville, GA
30501

Opening Hours

Monday 8:30am - 5pm
Tuesday 10am - 5:30pm
Wednesday 8:30am - 5:30pm
Thursday 8:30am - 5:30pm
Friday 8:30am - 5:30pm

Telephone

+16789714771

Website

Alerts

Be the first to know and let us send you an email when Racing Sport Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Racing Sport Services:

Shortcuts

Share

Category