RG’s Welding, Fabrication and Mechanical Service

05/20/2024

Aluminum slide in dog box for a ford ranger we finished up last week.

Get with us for all you welding, fabrication and mechanic needs.

05/20/2024

Things we have completed in the last couple weeks.

• Fabricated a rear bush hog arm.

• Polaris ranger that had secondary clutch issues got that fixed and also front and rear diff fluid change.

• Horseshoe rack we fabricated and made out of aluminum.

• Yamaha rhino we replaced the driveshaft and splines in rear diff and did a rear brake job and front and rear diff service.

• Chevy Tahoe we did a 6 inch rough country lift and new front steering components.

Get with us for all your welding, fabrication and mechanic needs.

04/28/2024

Things we have completed in the past couple weeks.

• Caterpillar weights that we cut to fit on a Kabota tractor

• BMW trailer hitch and in bed working install on a Ford f-250

• CNC plasma cut 2x4 wood stands

• CNC plasma cut bottom jack plate for a RV

• CNC plasma cut sign

• 6 inch rough country lift installed

Get with us for all you welding, fabrication and mechanical needs.

04/22/2024

Aluminum welping box with a stainless steel floor with recessed heat bowl we recently finished.

Get with us for all your welding, fabrication and CNC plasma cutting needs.

04/06/2024

Things we have done in the past couple weeks

• Fuel pump install on a Polaris Ranger

• Two Chevy 1500 trucks we had to install water pump and oil change on

• Welded a jack coupler on a generator trailer for the jack to hook on

• CNC Plamsa cut sink insert and bent the edges up on

• Starter and starter solenoid install on a Honda foreman

• Aluminum fuel tank that was leaking we found the leak and welded it

• Can-am outlander we did a oil change on

• BMW gooseneck hitch and 5th wheel attachment installed on a Chevy truck

Get with us for all your welding, CNC plasma cutting and mechanical needs.

03/09/2024

Things we have done the past couple weeks.

• 6 inch rough country lift kit install and idler arm, pitman arm and tie rods on a 2000 GMC 1500

• Brake job on a Ford f-150

• Electric shift motor replacement on a Honda Foreman 500

• CNC Plamsa cut greenhouse corner pieces

• CNC Plamsa cut tool for PVC made out of 3/8 inch aluminum

Get with us for all you welding, fabrication and mechanical needs either through messenger or a phone call to this number 984-960-8678 thanks.

02/22/2024

02/22/2024

Things that we have cnc plasma cut this week.

• Polaris Rzr radius rod plate
• Polaris Rzr intake skins
• Pinion gear holder tool
• Overhead winch mounting plate
• Plate cutouts for Bullock's Hardscapes

Get with us for all you CNC plasma cutting needs from signs, plates, gussets, weld on tabs and so much more.

02/22/2024

Things that have been done in the past couple weeks.

• Can am x3 oil change
• Can am x3 oil change and secondary clutch rebuild
• Aluminum trailer light bracket repair
• Honda foreman came in with electric shift not working we installed a bypass kit and got it back working

Get with us for all you welding and mechanic needs.

02/04/2024

Things that have been done the past week.

• Cab heater installed on this Kawasaki Teryx

• Floor supports welded under a trailer

Get with us for all you welding and mechanic needs.

01/21/2024

Horse trailer we welded bars in the window so horse can’t stick there head out of and repainted the underside of frame.

Message us for your welding and fabrication needs.

01/19/2024

Things we have repaired in the last couple weeks

• Polaris Rzr we replaced wheel bearings and ball joints on.

•CNC cut battery tray.

•Honda rancher got back running and went through brakes and suspension on.

•Honda accord had a bad starter so we replaced it and it’s good to go now.

Message is for all your mechanical needs.