MBS Manufacturing. Inc.

10/19/2026

Made in USA!
SKU:HDPDLT-A14
https://mbsmfg.com/HDPDLT-A14/
Primary Drive Locking Tool.
Application: this primary locking tool is compatible with Harley Davidson 1941- 2006 Twin Cam models.
Function: this primary drive locking tool is specially designed to lock the primary drive to remove or install the motor sprocket and clutch hub nut. Will fit most Primary Drives.

10/17/2026

sterndrive tool

10/16/2026

Made in USA!
SKU:M8HDRI-B31
https://mbsmfg.com/M8HDRI-B31/
Camshaft Needle Bearing Remover & Installer compatible with Harley Davidson Milwaukee Eight (M8)

Designed for Harley Davidson Milwaukee Eight (M8).
Function: This set is specifically designed for removing and installing the camshaft inner needle bearing in the Milwaukee Eight engines. This tool lines up with the bearing bore for a perfect fit each time.

10/15/2026

Made in USA!!
SKU:TMBP-B25
https://mbsmfg.com/TMBP-B25/
Transmission Mainshaft Bearing Inner Race Puller Set designed for Harley Davidson.
Application: this tool compatible with Harley Davidson 1984 to Present (except 2006 Dyna) Five (5) and Six (6) Speed Transmission Big Twins.
Function: designed to remove the mainshaft inner bearing race on Five (5) and Six (6) Speed Transmission without damage.
Replace OEM 34902-84.

10/15/2026

10/14/2026

Made in USA!
Inner Cam Bearing Installer & Puller Compatible with Harley Davidson TC 88 96 103 110 ALL Twin Cam & Dyna

SKU:HPTC96-C29 + HPTCAA-A29
https://mbsmfg.com/HPTC96-C29-HPTCAA-A29/

Set of Inner Cam Bearing Puller and Installation Tools compatible with Harley Davidson Twin Cam and Dyna models.
Compatible with all TC88, 96, 103 and 110s that use the B148 or the B168 bearings.

10/13/2026

Made in USA!
https://mbsmfg.com/ICBLDNA-B15-ICBPDNA-B16-B168-C12A/
SKU:ICBLDNA-B15+ICBPDNA-B16+B168-C12A
Inner Cam Bearing Puller and Installation Tools & Two new JTEKT (former Koyo/Torrington) B-168 Bearings.
Compatible with Harley Davidson Twin Cam and Dyna models. Designed for all TC96, 103, 107, 110 that use the B168 (AKA I.D. 1.00") bearings. Will ALSO fit for 2006 Dyna models. They use the larger 1.00" bearings (B168), and require the same tool as the newer (2007+) bikes.
Function: This set is specifically designed for removing and installing the inner cam bearings on the newer model Twin Cams and Dyna Harleys.

10/12/2026

Made in USA!
SKU:ICBLTC8-B11 + ICBPTC8-B12 + B148-C11B
https://mbsmfg.com/ICBLTC8-B11-ICBPTC8-B12-B148-C11B/
Inner Cam Bearing Puller and Installation Tools .
Compatible with Harley Davidson Twin Cam Models 1999-2006 and Dyna models. 
Will NOT fit 2006 Dyna.

Function: This set is specifically designed for removing and installing the inner cam bearings. This tool lines up with the bearing bore for a perfect fit each time.

10/10/2026

SANTA ROSA COUNTY, Fla. -- Santa Rosa County officials are clarifying what residents can and cannot sell from their homes after questions surged about Florida’s

10/09/2026

Made in USA!
SKU:B34
https://mbsmfg.com/B34/

Set of Inner Camshaft Needle Bearing Installer.
Designed for Harley Davidson Milwaukee Eight (M8).
Function: This set is specifically designed for installing the camshaft needle bearings.
Material: This inner bearing installation tool set is made of high-quality 1045 cold rolled steel, which is sturdy and durable. Tool comes with black oxide coating for years of use.