11/27/2024
Repairing garage door springs can be a dangerous task, call Prime Secure overhead doors at any time .
If you’re considering repairing them yourself, it’s important to be cautious and prepared.
1. Safety First:
• Disconnect the opener
• Wear safety gear: Safety goggles and gloves are essential
• Use the right tools
2. Repairing Torsion Springs (if these are broken):
• Release the tension: Use winding bars to slowly unwind the spring, relieving the tension.
• Remove the old spring: Unscrew the hardware holding the spring in place, and remove it carefully.
• Install the new spring: Slide the new spring into position, and use winding bars to wind it to the correct tension.
• Adjust and test: Once the spring is in place, check for proper balance by manually lifting the door.
3. Repairing Extension Springs (if these are broken):
• Release the tension: For safety, ensure the door is closed and the springs are not under tension.
• Remove the spring: Disconnect the spring from the pulley system and other hardware.
• Install the new spring: Place the new spring in position and reattach it to the pulleys.
• Check for proper function: Ensure the door opens and closes smoothly.
4.Consider Professional Help:
Garage spring repair is dangerous, and if you’re unsure or uncomfortable with the repair process, it’s highly recommended to hire a professional. Missteps can cause serious injury or damage to your garage door.
If you’re not confident in doing this yourself, reaching out to a licensed garage door technician for a safe and proper repair is always a good option.
