M-TECH Performance

M-TECH Performance M-TECH Performance offers a full array of services from a basic, routine service by our ASE certified technicians to our tested & proven custom tunes.

08/31/2026

BMW M3 Competition hitting the dyno with its new Precision Turbo big single setup ⭐️🔧
✅ Precision Turbo big single turbo and RK Manifold put to the test
🔧 Dyno pulls performed to see what this build is really making
📐 AFRs and boost monitored closely throughout every pull 🎯 Tune dialed in to safely maximize power
🤐 The numbers are in... but we’re keeping them a secret for now
👀 Let’s just say this M3 is a completely different animal now
Stay tuned — full YouTube video with the numbers drops TONIGHT at 8:45 PM!
📩 Building something big for your BMW? Schedule your project with M-Tech Performance.

08/31/2026

Dyno videos and horsepower numbers drop on YouTube TOMORROW! 👀🔥

This G80 M3 came in for a serious list of upgrades before hitting our AWD DynoJet 📈

🐌 Mtech Performance single turbo kit paired with a Precision Turbo & Engine NexGen 7275
💻 bootmod3 Rev2 board
💨 RKautowerks intake manifold
💪 Stock motor
⚙️ Stock transmission

A lot of turbo strapped to a factory motor and trans 😈

How much WHP do you think it made? 👀

🎥 Full dyno video and horsepower reveal drops tomorrow on YouTube

🔗 Link in bio

08/29/2026

Mercedes-AMG GT 43 in for a downpipe install ⭐️🔧
✅ Aftermarket downpipe installed for improved exhaust flow
🔧 Increased flow to help unlock additional power potential
📐 Fitment checked for a clean, proper install
🎯 Improved turbo spool and throttle response
🔊 More aggressive exhaust note to match the upgrade
🛠️ Professionally installed with attention to detail
A simple upgrade that makes a big difference — this GT 43 is breathing easier already.
📩 Ready to unlock more from your Mercedes-AMG? Schedule your build with M-Tech Performance.

08/25/2026

🏎️🔥 BMW M3 came through for an IRL downpipe installation …

🔧 IRL downpipe installed for improved exhaust flow
🛠️ Factory setup removed and everything fitted properly
⚙️ Hardware checked and secured throughout the install
💨 Finished up and ready to hear the difference

🔊 Hear how this thing sounds… 🔥🔥
This M3 is definitely making some noise now. 👀

📲 Need some work done to your BMW? Call M-Tech Performance and let’s get it taken care of. 🔧

08/21/2026

🔧🏎️ 2025 BMW M3 in the shop for some engine work, Aiming for more power, and that’s what we’re here to do.

🛠️ Motor pulled from the vehicle to access the internals
⚙️ Engine being opened up for internal inspection and repairs
🔩 Components carefully removed and inspected throughout the process
📐 Everything being handled with precision to make sure it goes back together right

Detailed jobs like this are all about doing it right the first time, and that’s what M-Tech is all about.

📲 Need some work done to your BMW? Give M-Tech Performance a call and let’s get it taken care of. 🔧

08/16/2026

Toyota Supra getting fitted with Mickey Thompson ET Street R drag tires ⭐️🔧
✅ Mickey Thompson ET Street R drag radials mounted and balanced
🔧 Set up to handle the demands of this 800+ hp Supra
📐 Fitment checked for proper clearance front and rear
🎯 Built for maximum grip off the line
🏁 Street legal, track ready
🚀 Powering down over 800hp to the ground
More power means nothing without the right rubber to put it down — this Supra is ready to launch.
📩 Ready to put your power to the ground? Schedule your setup with M-Tech Performance.

08/14/2026

$200 2020+ BMW ECU UNLOCKS! 🔓🔥

Don’t walk, RUN! 🏃💨

💻 2020+ BMW ECU unlocks
⚙️ S58, B58 and more
⚡ Done ON THE SPOT
🔓 Unlocked using autotunerusa
💰 ONLY $200

No shipping your ECU out and waiting around. Get your unlock handled right here at M Tech Performance. 🔥

SHOP OWNERS 👀

Want to offer ECU unlocking and tuning directly at your own shop?

We can help get you set up with autotunerusa so you can start unlocking and tuning in house. 💻🔓

📦 AutoTuner tools currently IN STOCK .tech performance

DM us for ECU unlock appointments or AutoTuner inquiries! 📲🔥

Address

5400 NW 10th Terrace
Fort Lauderdale, FL
33309

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+19549888324

Website

Alerts

Be the first to know and let us send you an email when M-TECH Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category