High Gear Customs LLC

High Gear Customs LLC Custom Muscle Cars / Restomods / Trucks With over 20 years in fabrication and welding we can cover all your automotive needs. Dealer for Restomod AIr

Did a little 360 video of the shop to mix things up a bit.
05/06/2022

Did a little 360 video of the shop to mix things up a bit.

Just showing the shop on my 5K 360 VR Camera I have.

It was a ton of work to get the 84 square body bed raised to clear the GSI frame. Completely disassembled the bed and st...
07/07/2021

It was a ton of work to get the 84 square body bed raised to clear the GSI frame. Completely disassembled the bed and start over to lift the bed floor 10 inches. Chevrolet tailgate repurposed to be used as a filler panel to cover raised bed gap. Fabricated wide wheel tubs fitted flush to clear the 31x18.5x20 wheels. Billet fuel filler add to rear of floor. Stake pockets filled in. Body seams welded and smoothed. Wheel arches raised to match height of front wheel arch. No more squatting bed look for this c10

Got in the Dynamat mega pak for the 84 square body show truck. The huge 2x4 sheets should keep the noise of the 632 ci m...
05/20/2021

Got in the Dynamat mega pak for the 84 square body show truck. The huge 2x4 sheets should keep the noise of the 632 ci motor to a minimum.

Core support for the 84 Squarebody show truck back from powdercoat. Went with a satin black on this one.
05/04/2021

Core support for the 84 Squarebody show truck back from powdercoat. Went with a satin black on this one.

Mike Bishop laying some sweet paint down! The 84 Squarebody is getting a satin finish blue under the hood. SloshTubz has...
04/16/2021

Mike Bishop laying some sweet paint down! The 84 Squarebody is getting a satin finish blue under the hood. SloshTubz has our wheels covered when the truck is sitting low.

Keeping it clean on the inside. Made a trick mount for the e-level controller in the square body ashtray. One of many li...
03/19/2021

Keeping it clean on the inside. Made a trick mount for the e-level controller in the square body ashtray. One of many little details for the 84 show truck.

The 84 square body getting fresh under coat before putting the cab on the frame.
03/05/2021

The 84 square body getting fresh under coat before putting the cab on the frame.

02/26/2021

Mike Bishop laying it down on the Squarebody firewall!!

Mike Bishop doing amazing work on the 84 Square Body show truck firewall. A sick House of Kolor blue with a flat finish ...
02/26/2021

Mike Bishop doing amazing work on the 84 Square Body show truck firewall. A sick House of Kolor blue with a flat finish is used to create a unique engine bay.

Fitting the flush mount windshield in the 84 c10. No more leaking rubber seal with modern glass.
02/02/2021

Fitting the flush mount windshield in the 84 c10. No more leaking rubber seal with modern glass.

High hump transmission cover and driveshaft tunnel installed. This will provide plenty of clearance for the beefy 4l80 ...
01/19/2021

High hump transmission cover and driveshaft tunnel installed. This will provide plenty of clearance for the beefy 4l80 transmission on the bagged 84 c10. 3M textured coating on the floor for maximum protection. Blake Young

Fabricated rear tubs for 84 c10 show truck. The tubs will clear the massive 20x15 wheels with 18 inch wide tires. Blake ...
01/14/2021

Fabricated rear tubs for 84 c10 show truck. The tubs will clear the massive 20x15 wheels with 18 inch wide tires. Blake Young

Address

11411 County Road 137
Flint, TX
75762

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+19037879099

Alerts

Be the first to know and let us send you an email when High Gear Customs LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Featured

Share