Griswold Performance LLC

Griswold Performance LLC Exclusively Harley Davidson Service, Repair, Performance Packages, Dyno Tuning, Electrical Diagnostic, Tires, Transmissions

Must be Softail Springer Season!
08/20/2026

Must be Softail Springer Season!

Good lookin 143 cu in....lots of work into this one.....As my customer said out with the old and in with the new....jimm...
06/15/2026

Good lookin 143 cu in....lots of work into this one.....As my customer said out with the old and in with the new....jimmy

04/18/2026

I can't even begin to express my feelings over the last couple of weeks. I have been reading about and dreaming about having a dyno machine for years. Now here I sit feeling like a little kid with a new toy. I have always strived to up my game and this is probably one of the largest steps accomplished.

So many people have helped me and my shop to continue to grow and be successful. You all know who you are....customers, friends and family you have made my dreams come true! You are ALL GREATLY APPRECIATED! THANK YOU, THANK YOU! THANK YOU!....Jimmy

First person up on the dyno is me!....jimmy
04/14/2026

First person up on the dyno is me!....jimmy

Getting closer and closer everyday to getting my Dynojet 250i up and running....power carriage and power clamp should be...
04/13/2026

Getting closer and closer everyday to getting my Dynojet 250i up and running....power carriage and power clamp should be in tomorrow...so excited...need to get the fresh air coming in and exhaust going out....Yo Marlatt! Get off vacation! Patrick A Marlatt then the real learning will begin....jimmy

This customers front brakes locked up causing him to crash....ÐO NOT SKIP SERVICE ITEMS! YOUR LIFE REALLY DOES DEPEND ON...
04/10/2026

This customers front brakes locked up causing him to crash....ÐO NOT SKIP SERVICE ITEMS! YOUR LIFE REALLY DOES DEPEND ON IT! Not all shops are trying to rack up your bill...there is some out there trying to sell you safety. If you don't trust your mechanic go somewhere where you do....jimmy

Got some great friends in helping me out with getting Dynojet 250i up and running...today's tasks included assembling c...
04/09/2026

Got some great friends in helping me out with getting Dynojet 250i up and running...today's tasks included assembling costco shelving, putting a new ring gear on the drum and assembling the dyno together....great progress was made.tomorrow's agenda is wiring from the panel to the machine....good times....jimmy

Hard to get a hold of me? Well leave a message please...I will try my best to get back in touch with you....lots going o...
04/05/2026

Hard to get a hold of me? Well leave a message please...I will try my best to get back in touch with you....lots going on...working on bikes, trikes, servicing my lawn mower at night...what the hell jimmy buy a dyno machine and get that up and running...good times all around...got a good life....jimmy

As you all know I like to show messed up stuff on my page here. This one could have cost my customer his life. He brough...
02/26/2026

As you all know I like to show messed up stuff on my page here. This one could have cost my customer his life. He brought bike in for some primary leaks. We'll as I was looking over his bike I found his rear tire like this with a huge gouge out of it. How did this happen? Somebody had put a long ass bolt through the seat and fender to hold the seat on. Oh did I mention it had air ride on it? Horrible situation that could have killed someone.

Moral to the story if you don't know what your doing don't do it. This customer was smart enough to bring bike in and have me look it over. He did ride it here though ....not good.

Riding motorcycles is dangerous...don't make it more dangerous.....jimmy

If you are replacing intake seals or your intake for any reason it is imperative that you build out your throttle body a...
02/23/2026

If you are replacing intake seals or your intake for any reason it is imperative that you build out your throttle body and air cleaner backing plate BEFORE you tighten up your intake screws evenly. If not it can bind and mostly likely break expensive parts. It can also create misalignment between mating parts and create flow problems.

Its things like this that unless you do it all the time or do not have experience that can cost you money and or have a motorcycle that runs less than desirable....jimmy

Address

212 55th Avenue East
Fife, WA
98424

Opening Hours

Tuesday 10am - 6pm
Wednesday 10am - 6pm
Thursday 10am - 6pm
Friday 10am - 6pm
Saturday 10am - 6pm

Telephone

+12533244942

Website

Alerts

Be the first to know and let us send you an email when Griswold Performance LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Griswold Performance LLC:

Shortcuts

Share

Category