Greber Racing Components

Greber Racing Components We are a manufacturer of high quality American made race car parts.

Sprint Car/Midget Toe PlatesSprint Car/Midget Toe Plates will bolt onto any direct mount hub. These plates allow you to ...
05/30/2026

Sprint Car/Midget Toe Plates
Sprint Car/Midget Toe Plates will bolt onto any direct mount hub. These plates allow you to set toe with the axle in the car (plates long enough to clear shock tower) or to set toe on the bench with the desired caster. Two tape measures are included with the two plates. Construction is 18” wide by 13 1/2” tall. Easily store them in your tool box or pit cart. Order yours at https://www.greberracing.com/store/p/sprint-carmidget-toe-plates.

Sprint Car/Midget Toe Plates will bolt onto any direct mount hub. These plates allow you to set toe with the axle in the car (plates long enough to clear shock tower) or to set toe on the bench with the desired caster. Two tape measures are included with the two plates. Construction is 18” wide by...

Torsion Tube PunchAn essential tool for all torsion bar cars. Heat up and smooth out any puckered or dimpled areas on yo...
05/30/2026

Torsion Tube Punch
An essential tool for all torsion bar cars. Heat up and smooth out any puckered or dimpled areas on your torsion tubes with this tool, designed specifically for the job. 36 1/4" in length. Order yours at https://www.greberracing.com/store/p/torsion-tube-punch.

An essential tool for all torsion bar cars. Heat up and smooth out any puckered or dimpled areas on your torsion tubes with this tool, designed specifically for the job. 36 1/4" in length.

Plastic Sprint Car Squaring SpacersBy maintaining consistent spacing from the birdcage to the nut, Squaring Spacers make...
05/29/2026

Plastic Sprint Car Squaring Spacers
By maintaining consistent spacing from the birdcage to the nut, Squaring Spacers make it easier to set rear-end alignment, prevent side-to-side variance, and streamline setup changes. Ideal for race teams who demand precision, repeatability, and fast service work. Order yours at https://www.greberracing.com/store/p/sprint-car-squaring-spacer.

By maintaining consistent spacing from the birdcage to the nut, Squaring Spacers make it easier to set rear-end alignment, prevent side-to-side variance, and streamline setup changes. Ideal for race teams who demand precision, repeatability, and fast service work. Sold as a pair Made with high

Spark Plug Storage BoxKeep your spark plugs organized and protected with this 3D printed storage box. Featuring clearly ...
05/29/2026

Spark Plug Storage Box
Keep your spark plugs organized and protected with this 3D printed storage box. Featuring clearly labeled numbered slots, it helps you track plug order for easy removal and reinstallation. Durable and secure, it’s perfect for the garage or at the track. Order yours at https://www.greberracing.com/store/p/spark-plug-storage-box-1.

Keep your spark plugs organized and protected with this 3D printed storage box. Featuring clearly labeled numbered slots, it helps you track plug order for easy removal and reinstallation. Durable and secure, it’s perfect for the garage or at the track.

Sprint Car Duplicator Combo KitThese two tools make it easy to accurately build and duplicate radius rods, tie rods, dra...
05/29/2026

Sprint Car Duplicator Combo Kit
These two tools make it easy to accurately build and duplicate radius rods, tie rods, drag links, and rear working arms for your sprint car. They can replicate radius rods ranging from 14” to 56” in length and are compatible with tip sizes of 5/16”, 3/8”, and 1/2”. Constructed entirely from aluminum and finished with a durable powder coat for long-lasting performance. Order yours at https://www.greberracing.com/store/p/4ma47duhoh4pih8w5emg1c2k7tmvix.

These two tools make it easy to accurately build and duplicate radius rods, tie rods, drag links, and rear working arms for your sprint car. They can replicate radius rods ranging from 14” to 56” in length and are compatible with tip sizes of 5/16”, 3/8”, and 1/2”. Constructed entirely fro...

Torsion Bar Bushing InstallerCrafted from durable steel with a plated finish to prevent rust, this tool is engineered to...
05/29/2026

Torsion Bar Bushing Installer
Crafted from durable steel with a plated finish to prevent rust, this tool is engineered to effortlessly install bushings into any frame. Offered for 1 1/8” and 7/8” bushings. Order yours at https://www.greberracing.com/store/p/torsion-bar-bushing-installer.

Crafted from durable steel with a plated finish to prevent rust, this tool is engineered to effortlessly install bushings into any frame. Offered for 1 1/8” and 7/8” bushings.

Standard Radius Rod BuilderDuplicates from 8”-32”. It has 5/16”, 3/8”, 1/2” tips. This works great for quarter midgets, ...
05/29/2026

Standard Radius Rod Builder
Duplicates from 8”-32”. It has 5/16”, 3/8”, 1/2” tips. This works great for quarter midgets, go karts, micros, midgets, micros, and sprint cars. Storage bag sold separately or in combo kit. Bags are made from nylon. Order yours at https://www.greberracing.com/store/p/2021-grc-radius-rod-builder.

Duplicates from 8”-32”. It has 5/16”, 3/8”, 1/2” tips. This works great for quarter midgets, go karts, micros, midgets, micros, and sprint cars. Storage bag sold separately or in combo kit. Bags are made from nylon.

Scalloped and Dimpled Brake Rotor -Iron Rotor-7 in. x 8 Bolt Circle-32 Vane-Weighs 5.8 lbs. for 11.750 and 6.2 lbs. for ...
05/28/2026

Scalloped and Dimpled Brake Rotor
-Iron Rotor
-7 in. x 8 Bolt Circle
-32 Vane
-Weighs 5.8 lbs. for 11.750 and 6.2 lbs. for 12.190
The dimples allow for a lighter rotor and also create brake torque. Dimples won’t allow the rotor to crack like cross drilled rotors. Order yours at https://www.greberracing.com/store/p/scalloped-and-dippled-brake-rotor.

Iron Rotor 7 in. x 8 Bolt Circle 32 Vane Weighs 5.8 lbs. for 11.750 and 6.2 lbs. for 12.190 The dimples allow for a lighter rotor and also create brake torque. Dimples won’t allow the rotor to crack like cross drilled rotors.

Hinged Front Axle Assembly JawsDesigned to hold your axle securely in a vice for when being assembled. Constructed from ...
05/28/2026

Hinged Front Axle Assembly Jaws
Designed to hold your axle securely in a vice for when being assembled. Constructed from high quality plastic. Magnets are built in to keep the jaws secure on the axle. Hinge added to help make it more user friendly. Available in sizes 1 1/2”, 1 3/4”, 2”, 2 1/4”, 2 3/8”, and 2 1/2”. Order yours at https://www.greberracing.com/store/p/hinged-front-axle-assembly-jaws.

Designed to hold your axle securely in a vice for when being assembled. Constructed from high quality plastic. Magnets are built in to keep the jaws secure on the axle. Hinge added to help make it more user friendly. Available in sizes 1 1/2”, 1 3/4”, 2”, 2 1/4”, 2 3/8”, and 2 1/2”

Drag Link Tether1” nylon drag link tether with steel buckle fastener. Your chose between double buckle fastener or singl...
05/28/2026

Drag Link Tether
1” nylon drag link tether with steel buckle fastener. Your chose between double buckle fastener or single buckle with sewn in loop. Order yours at https://www.greberracing.com/store/p/draglink-tether.

1” nylon drag link tether with steel buckle fastener. Your chose between double buckle fastener or single buckle with sewn in loop.

Address

313 Clark Street
Elyria, OH
44035

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Telephone

(440) 322-3685

Website

Alerts

Be the first to know and let us send you an email when Greber Racing Components posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Greber Racing Components:

Shortcuts

Share

Category