U-Blast Stencil

Call Directions Website

U-Blast Stencil Established in 2013, we are a trusted and proud carrier of U-Blast stencil – professionally manufactured products, each one meticulously tested.

Our primary objective is to provide high quality rubber stencil for the craftsman. Stencil that is not only flexible when needed, but also tough under pressure. Sandblasting or shot peening, we are dedicated in providing value through our products. We take pride in our pursuit for quality and take confidence in our process. We aim to make sure the rubber stencil is the last thing you have to worry about.

10/23/2026

A closer look at the UB1 stencil during the plotting process.

Built for consistent performance, the UB1 is designed to cut cleanly, w**d easily, and maintain design integrity throughout production.

Straightforward, consistent, and quality you can count on. That applies to our products and the support behind them.That...
10/22/2026

Straightforward, consistent, and quality you can count on. That applies to our products and the support behind them.

That's why we share clear answers to the questions we hear most, from choosing the right stencil and adjusting plotter settings to troubleshooting, cleanup, ordering and more.

Have a question? Check out our Support FAQs 👇
https://www.ublaststencil.com/support

10/22/2026

Great work from Handeland Concrete LLC. Always wonderful to see our stencil in action.

Small stencil mistakes can turn into expensive rework.Choosing the wrong stencil, dealing with design shift, or using th...
10/20/2026

Small stencil mistakes can turn into expensive rework.

Choosing the wrong stencil, dealing with design shift, or using the wrong level of adhesion can affect your finished stone and cost your shop valuable time and money.

In our latest blog, we break down three common sandblasting stencil mistakes and how to avoid them for cleaner, more consistent results.

👉 Read the full article to learn how to protect your stone and get the job done right the first time.

https://www.ublaststencil.com/blog/sand-blast-stencil-mistakes-that-ruin-good-stone-and-how-to-avoid-them

How long have you been sandblasting?A.) Less than 5 yearsB.) 5 – 10 yearsC.) 10 – 20 yearsD.) 20+ yearsThere’s a lot of ...
10/15/2026

How long have you been sandblasting?

A.) Less than 5 years
B.) 5 – 10 years
C.) 10 – 20 years
D.) 20+ years

There’s a lot of experience in this industry. Let’s see how long everyone’s been at it 👇

10/13/2026

Precision starts with a stencil that stays where you put it.

The U-Blast 719 Series is built for monument and signage professionals who need dependable performance from cutting and transfer through to the final blast.

Our updated stencil rubber combines flexibility, blast resistance and blade protection with Anti-Shift Mesh™ Surface technology to help keep designs exactly where you put them.

What makes the 719 Series stand out:
✅ Double liner helps keep centers securely in place during transfer
✅ Medium tack adhesive for stone and smooth surfaces
✅ Flexible, blast-resistant rubber
✅ Anti-Shift Mesh™ Surface helps prevent design shift
✅ Built to fit all machine types

Less time fighting your stencil. More confidence in the finished result.

Explore the 719 Series: https://www.ublaststencil.com/products/719-series

10/09/2026

A closer look at the UB1 stencil during the plotting process.

Built for consistent performance, the UB1 is designed to cut cleanly, w**d easily, and maintain design integrity regardless of temperature. It's one of the many ways U-Blast helps monument professionals produce reliable results every day.

What is it really like inside U-Blast?In this team throwback, we switched things up with a game of “Most Likely To” to s...
10/08/2026

What is it really like inside U-Blast?

In this team throwback, we switched things up with a game of “Most Likely To” to see how well the U-Blast crew knew each other.

Who controls the office music? Who has the messiest desk? Who brings the craziest snacks? And who is most likely to pull a prank?

Some familiar faces have since moved on to new adventures, but this video is a fun look back at the people and personalities that have been part of the U-Blast story.

We work hard, but enjoying the people you work with has always been part of the culture at U-Blast.

Watch the full video on YouTube:
https://www.youtube.com/watch?v=EN1_txp0MTg

Every recut, repair, or damaged surface costs time and money.The right stencil helps you get it right the first time.U-B...
10/06/2026

Every recut, repair, or damaged surface costs time and money.

The right stencil helps you get it right the first time.

U-Blast stencils are built for dependable performance, helping monument professionals achieve clean, consistent results while reducing avoidable rework.

From setup to final blast, choose a stencil you can trust to perform.

👉 Explore U-Blast stencils: https://www.ublaststencil.com/products

The finished look is only as good as the stencil behind it.A quality rubber stencil does more than hold your design in p...
10/01/2026

The finished look is only as good as the stencil behind it.

A quality rubber stencil does more than hold your design in place. It helps protect the surface, maintain crisp detail, and deliver consistent results from the first blast to the last.

In our latest blog, we explain how the right stencil can improve image precision, reduce rework, and help you achieve a professional finish on every project.

👉 Read the full article to learn why choosing the right rubber stencil matters.

https://www.ublaststencil.com/blog/why-a-quality-rubber-stencil-for-sandblasting-makes-or-breaks-your-finished-look

Address

1037 Old Middleton Road
Elberton, GA
30635

Opening Hours

Monday 10am - 4pm
Tuesday 10am - 4pm
Wednesday 10am - 4pm
Thursday 10am - 4pm
Friday 10am - 3pm

Telephone

+17062832289

Website

Alerts

Be the first to know and let us send you an email when U-Blast Stencil posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share