Riney Fabrication

Riney Fabrication Riney fabrication is a private not open to the general public fabrication shop

01/12/2024

Okay your Christmas lights are cool but Christmas is over turn them off take them down

Local welding Supply shop went out of business a few years back I've had my eye on this Miller sign for a few years I've...
10/28/2023

Local welding Supply shop went out of business a few years back I've had my eye on this Miller sign for a few years I've asked about it a couple times and yesterday he told me go ahead and take it maybe he was tired of at me asking but it's going to be a great addition to the welding shop

It took a little over a year but finally getting some of the laser cut Parts powder coated and installed on the bike
04/06/2023

It took a little over a year but finally getting some of the laser cut Parts powder coated and installed on the bike

Custom cut Ruckus parts
03/09/2022

Custom cut Ruckus parts

Yep this is not the post that I thought I would be making apparently we now have a shop cat "biscuit" he showed up yeste...
11/26/2021

Yep this is not the post that I thought I would be making apparently we now have a shop cat "biscuit" he showed up yesterday and my daughter it's pretty fond of him we went out this morning and got him some turkey dinner cat food and we made him a little box in the garage for him he seems pretty happy here after more than 24 hours

Super excited I got the Hub back from The Machinist today he knocked it out of the park you know how they say it's going...
05/28/2021

Super excited I got the Hub back from The Machinist today he knocked it out of the park you know how they say it's going to stop on a dime this thing is going to stop on a penny and pick up $0.09 send text to Andrew

Little customer driver I did today rebuilding unibody section where the shock mounts on the passenger side of a G20 van ...
05/16/2021

Little customer driver I did today rebuilding unibody section where the shock mounts on the passenger side of a G20 van I normally would not take on something like this but the gentleman Express to me that this van has a lot of sentimental value to him and he just wanted to get a few more miles and a few more years of memories his parents purchased the van brand new he was very happy customer

Progress report on the Honda bite reflex swap ---- got the motor mount fabricated and the shock came out started just go...
05/16/2021

Progress report on the Honda bite reflex swap ---- got the motor mount fabricated and the shock came out started just got to add shock tabs to the center shock mount and build a plate for the frame socktabs to mount too

Didn't get any progress done today had to do a customer project

Working on the Honda bite reflex swap rear disc brake setup
05/09/2021

Working on the Honda bite reflex swap rear disc brake setup

So I've been working on plans for the new bed I have figured out exactly 4 6x6 16 ft long square tubing will build the b...
01/19/2021

So I've been working on plans for the new bed I have figured out exactly 4 6x6 16 ft long square tubing will build the bed plus there will be a little bit of 2x2 square tubing about 15 feet plus there will be a little bit more material just support the underside of the mattress but just the 6 by 6 square tubing will weigh in at 931.2 lbs. So this bed will weigh every bit of 1000 lb plus there will be weld on D rings we're going to leave the reasoning for those D rings a secret---- Lorrie Gaubatz

Address

Eastpointe, MI
48021

Website

Alerts

Be the first to know and let us send you an email when Riney Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category