Precision Designs

Precision Designs Precision Designs was founded by Tom Stark in 2009.

06/18/2026

We got Op 1 Finished up for the top part of the fan shroud on the 66 Mustang. We now will set up the 4th axis in our machine to finish off the bottom side of the of the shround. Then we can start the procces on the lower half of the shroud!

06/17/2026

Billet Hood Hinges for 1960–1966 GM Trucks are in stock and ready to ship. Designed and machined in house we built these to solve the problem of having a thick sheet metal hinge arm that doesn't repeat or look good. We made these out of billet to improve the looks of the arms. We also incorporated a ball bearing into the arm to improve the operation of the hood. On top of all of that we designed these hinges to have plenty of adjustment to get the hood in the correct spot every time!

06/16/2026

Throwback to getting the '56 detailed by the ceramic boys!

The 66 c10 body is at and they have it in final prime. The boys have been working now stop on the cab and we are excite...
06/15/2026

The 66 c10 body is at and they have it in final prime. The boys have been working now stop on the cab and we are excited to see it with some color on it. While they are working on the cab we have been working on all of the parts, getting them ready for coating or polishing!

06/12/2026

Little recap on the engine swap on the 56 Buick Century. We painted this LS3 similar to a factory engine color to try and blend it into the engine bay, then we paired that with a Billet Specialties, Inc. tru-track drive system. We also put a Motion Raceworks Valley cover on top to cap off the top of the engine.

06/11/2026

The finishing touches are being completed on the hood for the 66 Mustang. We Finishing up the fitment of the scoop to the fan shrould as it will suck out majority of the hot air that will come off the Radiator.

06/10/2026

Engine is out and on the stand! The final assembly procces starts now as we are prepareing the engine and many other parts that are already out of the mustang ready for paint, powder coating, or polishing. We are finishing up some small touch up work on the car before the car heads back to paint.

06/10/2026

Our billet toggle switches provide a easy way to keep the interior of your car clean while giving you a functional switch. These are available in multiple styles of switches depending what you need the switch to do. Billet USA Made goodness made in house here in Denver Colorado.

Air ride controls flush-mounted and looking incredibly clean in the custom dash. We wanted to make sure the e-Level cont...
06/09/2026

Air ride controls flush-mounted and looking incredibly clean in the custom dash. We wanted to make sure the e-Level controller was easily accessible for the driver, but still looked like it belonged there.

06/08/2026

Cooling is crucial, but so is how the engine bay looks. Instead of settling for an off-the-shelf piece, we designed and are machining this custom billet fan shroud in house for the Mustang. It's these custom sudle touches that really make a build stand out.

Address

13903 East Smith Drive
East Aurora, CO
80011

Website

Alerts

Be the first to know and let us send you an email when Precision Designs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Precision Designs:

Shortcuts

Share

Category