REM Speedeks

06/19/2026

Gen 1 Viper owners, it took a while but we didnt forget you!!!

The clutch pedal travel reduction prototype is complete. Production kits expected to be available early August.

It will allow 2 height positions;
Pos. #1 ~level with the brake and 25% travel reduction.
Pos. #2 ~1 inch above the brake and 20% travel reduction.

Kit will include a clamp on push rod pivot relocator, and a wedge adapter for the master cylinder body to make sure all the geometry is correct.

06/08/2025

Hello Gen 2 Owners!!! Clutch pedal upgrade kits are in stock.
Summer is basically here and there are so many fun cruises ahead. If you're looking for a really nice upgrade for your car this season, check out our kit.
It doesn't matter how long your legs are, everyone enjoys a shorter pedal throw. People have discussed this topic since the late 90s and October last year, we actually did something about it.

A huge thank you goes out to those of you that have already purchased the kit, you guys rock!

Available at:
https://remspeedeks.com/products/gen-2-viper-modified-clutch-pedal-linkages

05/15/2025

GEN 3/4 Viper clutch pedal ratio kits are now available! Reduce the total travel by 25%, and pick from 3 height positions. If you're tired of having to bring your knee way up, and then tip-toe to get the clutch pedal all the way in, this is a solution you'll really enjoy.
https://remspeedeks.com/products/g3-4-viper-clutch-pedal-ratio-kit-ctl-vipg3_4-m-a-1087

10/27/2024

Customers are loving the Gen 2 clutch travel / throw reduction kits, and it's time to develop a solution for Gen 1 and 3-4-5!!! Please comment on the REM SPEEDEKS page on what changes and features you would like to see.

Check out what we did for the gen 2 at: https://remspeedeks.com/products/gen-2-viper-modified-clutch-pedal-linkages

10/22/2024

Thanks for the shoutout Nic!

10/22/2024

Gen 2 Drivers, shorten your clutch pedal travel 20% with our stop drop and ratio kit!
Questions & Answers:

Q: How is this different from the simple lowering linkages that have been around for 20 years?

A: The simple shortened bar products that are out there only shift the range of motion down. They do NOT reduce total travel, and they do NOT change the motion ratio. Since you still have to make the full pedal stroke, the end position is even closer to the firewall that original! Please see our informational graphic in the product photos comparing the start and end points. To have a change in motion ratio or travel, you have to change the pivot point locations, which we have done.

Q: If I don't use the end position stopper bolt, will I still have a shorter pedal travel?

A: Yes, the 1.2x motion multiplication is built into the pivoting locations and is completely independent of the bolt adjustment.

Q: Is this kit difficult to install?

A: Installation requires you to remove the driver's seat and lay on your back on the footwell floor to access the components. Removing the clips can be challenging due to limited visibility.

https://remspeedeks.com/products/gen-2-viper-modified-clutch-pedal-linkages

(Additional Key words: Height Travel Throw Distance Engage Disengage Catch Grab)

10/10/2024

10/9 Update: 40 Kits in stock. Visit:

Long clutch pedal travel and a high initial pedal position is a well-known complaint about the Dodge Vipers otherwise stellar driving experience. We have developed a solution. The CTL-VIPG2-M-A-1016 kit provides you with these benefits: 20% ratio reduction, which equals 1.5 inches less clutch pedal....

09/23/2024

PRICING ANNOUNCED!!!
$438.85 Exc. Tax/ Shipping.
We are almost done buttoning up the web store and start taking orders beginning of October.

The CTL-VIPG2-M-A-1016 kit provides you with these benefits:

-20% ratio reduction, which equals 1.5 inches less clutch pedal travel
-Lower starting position of the pedal
-Adjustable end position stopper
-Installation does not require any
permanent modifications to the vehicle.

Applicable model years: 1996-2002 Dodge Viper

PROUDLY MADE IN THE U.S.A.

09/12/2024

Hello Viper Owners!

Do you ever wish your Gen 2 clutch pedal travel felt shorter and sportier? Well now that is possible.

-Lower Starting Position
-20% Travel Reduction
-Adjustable end stop
- Requires no permanent modification and installs without removing the pedal box.

What you see here is:

The "Gen 2 Viper Clutch Pedal Stop Drop and Ratio Kit"

PROUDLY MADE IN THE U.S.A.

We expect to have 40 kits ready to ship by the end of September 2024.

FOLLOW US for weekly updates, and when ready, a link to where to purchase your kit.

Thank you!!!