Gibson Cycles

Call Directions Website Contact the business

Gibson Cycles Parts, Service, repairs, upgrades, customization and fabrication on Harley Davidson motorcycles .

Two new tires knocked out on this Road Glide 🤘🏻
10/22/2026

Two new tires knocked out on this Road Glide 🤘🏻

The end of the day is for government work 🤘🏻
10/21/2026

The end of the day is for government work 🤘🏻

Rear tire knocked out on this Street Glide 🤘🏻
10/21/2026

Rear tire knocked out on this Street Glide 🤘🏻

10/21/2026

2016 Road King came in on a trailer. Got her brought back to life and I also added some Thrashin 9.5” pullbacks, Thrashin Mid Bend handlebars, Thrashin 1” riser spacers and a few other goodies. Installed and married another speedometer to the bike. She also got a full service and a new front tire. 🤘🏻

More pics of the stem on the Electra Glide. Apparently they cut the bearing off with a 6” grinder!
10/20/2026

More pics of the stem on the Electra Glide. Apparently they cut the bearing off with a 6” grinder!

Tore this Electra Glide down for a front fork rebuild and stem bearing replacement. Somebody’s been in it before and the...
10/20/2026

Tore this Electra Glide down for a front fork rebuild and stem bearing replacement. Somebody’s been in it before and the forks are full of vice marks, ordered a new set of fork tubes because these will never seal. Somebody cut the stem bearing off previously and done a real hack job on the stem with a grinder. Of course these trees are obsolete from Harley but I’m hoping I have a set of trees stashed away. 🤘🏻

TC88 Road King came in with noise. In tearing it down to find the culprit we found a mess of a botched cam chest upgrade...
10/19/2026

TC88 Road King came in with noise. In tearing it down to find the culprit we found a mess of a botched cam chest upgrade done by a dealership believe it or not. The wrong cam sprockets spacer was used. They actually used a cam sprocket spacer for 07-up TC motors and instead of the spacer riding against the inner race of the cam bearing, it’s been rubbing against the billet cam plate and it got hot enough that it actually welded the cam sprocket spacer to the cam sprocket. The last photo shows the cam sprocket spacer that should have been used vs. what was actually in there. This is so bad. The customer had already spent a fortune and now it’s gonna be more expensive and I’m hoping that all of the metal shavings have not got into the rod bearings. 🤘🏻

Good morning everybody. We’d like you to meet Jaxon Thomas Blair born 10-17-26! Our first grandbaby! He is perfect in ev...
10/19/2026

Good morning everybody. We’d like you to meet Jaxon Thomas Blair born 10-17-26! Our first grandbaby! He is perfect in every way! Thank you for everybody’s prayers over the weekend! Mama and baby are both doing great!

The shop will be back open today during normal business hours. Please be patient with us as we navigate through the day. 🤘🏻

10/16/2026

Baby Jaxon has not made his arrival yet, but we are all still patiently waiting for him to make his first appearance. Therefore, the shop will be closed today as well. Thanks for the prayers, please keep them coming! 🤘🏻

10/15/2026

We will be closing the shop at 1 today and it’s possible we may be closed tomorrow. The doctors are inducing our daughter into labor so we are heading to the hospital in just a bit! Please be in prayer for our family! 🤘🏻

Address

4788 Mt. Cross Road
Danville, VA
24540

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm
Saturday 9am - 3pm

Telephone

+14345491998

Website

Alerts

Be the first to know and let us send you an email when Gibson Cycles posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Gibson Cycles:

Shortcuts

Share

Category