72 Shades of Gray c-10 build

03/02/2024

02/06/2023

Paint laid down Platinum Collision, Colby Wilbanks I believe.

09/04/2020

Boat is sold!!!

My 2020 Skeeter FXR20 is for sale!!! Loaded out and needs to go!!! Boat has been wrapped since day one!!
2-Powerpole blades
TH marine hydro jack plate
112 Minn Kota ultrex 52’ shaft
Hummingbird 12 Helix at console
Hummingbird 12 Helix at Bow
Custom Skeeter travel Cover

$65,000.00

08/14/2020

Platinum Collision is locally owned and operated. We’re a premier full-service collision repair center with locations in Forney & Tyler. Our advanced yet affordable solutions and service will get you back on the road in no time.

08/14/2016

Another project..the inspiration for the shops name.. look for progress on Shades next werk

03/24/2016

Trying to wrap up the gaps and address minor details at same time

03/23/2016

Drilled the holes for the widened wells and finished dressing out the floor openings. The wheels are coming again tomorrow to check the fit of the extended lower bedside braces. The wheels are getting pushed out as far as possible,, a quarter inch from the wheel opening.
Minor filler work remaining on the bed and waiting on a good set of tail light bezel to finalize gate position before William takes it for paint paint prep. Then back to right side gap work.

03/21/2016

Most of the bed assembly is ready for the first dry blocking? Dressing welds on the front bed panel and extending the factory crewmembers remain. Plus minor misc details.

03/18/2016

Another c-10 build early progress..will create page for this project and announce it on all my project pages.

03/04/2016

These panels are extremely rare if not attainable at all any more. The only way to get your hands on a quarter panel is to actually make it. You should note that…

03/02/2016

Project update..there has been quite a bit done this last week or two. Better pics soon from my other camera. The remaining gap work on the right side are almost thru metal work. The tail gate shape has been made not sucky. . The fuel filler neck is being welded in final position.