Hickernell Horse Power

Hickernell Horse Power Specializing in Harley Twin Cam and M8 Motorcycles. Certified Dynojet Tuner and Tuning Center. In house Dynojet 250I dyno fully updated with Winpep 8.
(3)

Big bores and cam changes are our specialty. We wanna make you some horsepower. Operating on appointment only at this time. Nights and Weekends.

2010 Ultra Classic came in needing some help. We don't know much about it other than the tune that was in it was really...
10/21/2025

2010 Ultra Classic came in needing some help. We don't know much about it other than the tune that was in it was really lean. He was hooked up with a fresh Powervision tune to clean everything up.

2024 FXLRST putting down some good numbers yesterday. Some simple bolt on parts on a otherwise stock 117 💪. HPI ported ...
09/07/2025

2024 FXLRST putting down some good numbers yesterday. Some simple bolt on parts on a otherwise stock 117 💪.

HPI ported intake manifold
HPI air cleaner
HPI shorty exhaust

Something we don't see much of anymore. But here's a 92 Evo that needed a good going over. Had some previous modifica...
09/03/2025

Something we don't see much of anymore. But here's a 92 Evo that needed a good going over. Had some previous modifications that somehow held together for many years. Valves were beating each other for quite sometime.

Mega-flo hooked us up with a new cylinder bores and some wiseco pistons along with fresh heads to match up with the new EV27 cam and S&S cases we installed. Off to the customer they go for installation and then back for proper brake in on the dyno.

First pull on a M8 143 build after break in. We need to address a oil leak due to aftermarket valve covers and possibly...
07/30/2025

First pull on a M8 143 build after break in. We need to address a oil leak due to aftermarket valve covers and possibly talk about bigger exhaust choice as this one is falling short after 5,300 rpms. Regardless this is gonna be a monster on the street! 💪

23 Street Glide ST with a fresh 128 big bore we just finished up.Custom 128 kit 11.8 compressionFuel Moto +1 CNC headsMa...
07/27/2025

23 Street Glide ST with a fresh 128 big bore we just finished up.

Custom 128 kit 11.8 compression
Fuel Moto +1 CNC heads
Max Cell 837B cam
Fuel Moto Jackpot Shorty Exhaust
62mm HPI throttle body

This one has some lungs! Still making power at 6400 rpm's. Video in the comments

Shop will be closed from July 31st through Aug 10th for summer vacation. No appointments will be made until after we op...
07/25/2025

Shop will be closed from July 31st through Aug 10th for summer vacation. No appointments will be made until after we open back up on Aug 11th. I will try to answer calls and questions when I can.

Tomorrow July 12th at Luckys Drag City they are looking to have a motorcycle class. Anyone is welcome to show up. If y...
07/11/2025

Tomorrow July 12th at Luckys Drag City they are looking to have a motorcycle class. Anyone is welcome to show up. If you need more info message us and we will put you in touch with someone.

2018 Road GlideS&S 475 camBase map vs a custom Powervision tune. Big gains!
07/11/2025

2018 Road Glide
S&S 475 cam

Base map vs a custom Powervision tune. Big gains!

2024 FXLRST 117 Woods 777 camsSE 64 Throttle Body/ Ported intake6.3 injectorsFuel Moto AC/DC air cleaner with +1 filterF...
06/04/2025

2024 FXLRST 117

Woods 777 cams
SE 64 Throttle Body/ Ported intake
6.3 injectors
Fuel Moto AC/DC air cleaner with +1 filter
Fuel Moto Jackpot Riot exhaust
Powervision tuned

Customer put this combo together himself and it turned out great!

Here's a 2023 M8 Road Glide 107 we just finished up. Very respectable numbers for a 107. Probably one of the better o...
05/21/2025

Here's a 2023 M8 Road Glide 107 we just finished up. Very respectable numbers for a 107. Probably one of the better ones I have seen on this dyno.

CR483 cam
Bassani Road Rage 3 exhaust
VTP 60 ported intake
Trask Air cleaner
Stock injectors ( Until the big bore happens)
Powervision Tuned

Here's one you don't see very often. Jims Performance Machine 135 going back together after a refresh. With a few upgra...
05/14/2025

Here's one you don't see very often. Jims Performance Machine 135 going back together after a refresh. With a few upgrades along the way!

T- Man helped us out with the fresh bore on the cylinders and new 662-2 cam. And Mega-Flo hooked us up with some beautiful port work and a blue print sheet of all the measured clearances and dimensions.

Looking forward to get this one done. It's gonna have some nuts! 😉

Customer built M8 132 throwing down some good power today!FM 132HPI 62 throttle bodyStock heads (mild porting)Woods 408 ...
05/12/2025

Customer built M8 132 throwing down some good power today!

FM 132
HPI 62 throttle body
Stock heads (mild porting)
Woods 408 cam
Sawicki 2 into 1
Powervision tuned

Address

22802 S Hickernell Road
Conneautville, PA
16406

Telephone

+18145734328

Website

Alerts

Be the first to know and let us send you an email when Hickernell Horse Power posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hickernell Horse Power:

Shortcuts

Share

Category