Michigan Boyz RaceCraft

Michigan Boyz RaceCraft MBR Specializes in purpose built, high quality, Mud and Sand drag chassis.

Updating the Midplate/Firewall on the second Chassis. Materials on order, firewall and floor tin next.
11/17/2025

Updating the Midplate/Firewall on the second Chassis. Materials on order, firewall and floor tin next.

Brett Russell wasting no time with his program. HEMI already sitting in the rails. ✔️
11/16/2025

Brett Russell wasting no time with his program. HEMI already sitting in the rails. ✔️

Name that Bellhousing pattern..
11/14/2025

Name that Bellhousing pattern..

Got the second Chassis out of the storage unit this morning. Some surface rust but nothing some WD40, ScotchBrite and l...
11/08/2025

Got the second Chassis out of the storage unit this morning.
Some surface rust but nothing some WD40, ScotchBrite and little elbow grease can’t cure.. Have material on order, excited to get rolling on it!.

Shawn Barber Brian Erne Thank you both for the suggestions and input. I really need to take the time to work through the...
11/07/2025

Shawn Barber Brian Erne
Thank you both for the suggestions and input. I really need to take the time to work through the iterations for sure, I usualy tend to try and Run Before I walk. If I do things like I’m thinking it will be a substantial investment w reg to tooling/plugs, and pulling molds. This front clears a 29” tire w aprox 2.5” vertical. If you set the shock up say 1.5” from fully compressed I’d say it’s good. 🤔

Had a friend save the day and was able to scan the Jeep last week. I think I’m on plan J or K, which is a long way from ...
11/06/2025

Had a friend save the day and was able to scan the Jeep last week. I think I’m on plan J or K, which is a long way from plan A… But just might be getting some traction surfacing things. It’s a start.

Houston!!!!This is not a problem lol.. GONE! Off to its new home.Excited to see how they finish things.
11/01/2025

Houston!!!!
This is not a problem lol..
GONE! Off to its new home.
Excited to see how they finish things.

From Art to Part. This project bout wore me out. The Design/Modeling side was relatively straignt forward. It was the ...
10/29/2025

From Art to Part.

This project bout wore me out. The Design/Modeling side was relatively straignt forward. It was the getting things sourced, and parts machined and in hand that had me pulling my hair out.
I commited and sent the deposit to manufacture on 12/21/21. Parts finally landed in Clarkston 6/27/23. Through the process I think I’ve learned a few things… I think.. 🤷‍♂️
These cases have just been sitting, as I’ve been busy working to button my personal build up which was started in Dec,2018’ and just completed last month.
The roller is headed to its new home in the next few days, and I’m def excited to see where it ends up, and what combo it’ll have in the rails.
Few items need addressed before they’re available, I just may be gaining on things.

Want this out of my Garage, make me an offer, you might be suprised.For saleSonny’s 5.3”BS 864”Sonny’s 5.3” HeadsBillet ...
10/26/2025

Want this out of my Garage, make me an offer, you might be suprised.

For sale
Sonny’s 5.3”BS 864”
Sonny’s 5.3” Heads
Billet Dailey Oil Pan/Pump
Billet CN Block 11.85”deck
Pulls 20” of Vacuum
70mm LSM/Sonny’s Cam
Jesel Shaftech rocker assembly
Manton Push Rods
Jesel 1.062” lifters
Jesel belt drive
BME Pistons New
GRP Rods New
Callie’s crank Just checked/polish
New bearings
New rings
Fresh hone
4 Nitrous Systems
Injectors and nitrous were set up flowed by Switzer Dynamics.
Front Drive distributor
Fuel pump, regulator
Sonny’s Manifold
2 Manifold burst panels
Acufab Throttle Body’s
Big Stuff 3 w can bus, all wiring/sensor/drivers
Spare Ecu and spare harness
RacePak dash w can bus
Speed wire nitrous controller
MSD Grid 7720/7730 boxes
Spare pistons
Spare Rods
spare Rings
Spare Springs
5.3”Bore Torque plate
M&M converter for combo
Nitrous Bottles
Headers w 5” bull horns
50k-best?..

SOLD!MBR Chassis 25:1 double frame rail.Ultra Lite Carbon body.BBC Front/Mid plate. Kirkey 17” seat/seat cover.Stroud ca...
10/24/2025

SOLD!

MBR Chassis

25:1 double frame rail.
Ultra Lite Carbon body.
BBC Front/Mid plate.
Kirkey 17” seat/seat cover.
Stroud cam lock 5point harness.
Strange billet rack, 4130 tie rods, heims, steering shafts w Apex U-joints .
Grant Steering wheel w extension, Strange quick release hub.
Mcamis Fab 9”, symmetrical ends,4130 back brace.
MW 3” ARB, moly end links.
Strange 40 spline axles.
Ultra case 3rd member 4:56
Rear diff driveshaft enclosure.
QM 4130 drive shaft tunnel.
QM Extreme 4-link, 1 1/2” bars, 4130 Aurora rod ends, 1/2” NAS bolts.
QM Extreme 4130 wishbone,Aurora rod ends, NAS bolts.
Willwood master cylinder.
Strange 4piston rear calipers, rotors.
Willwood 4piston front caliper, rotors.
Stainless brake lines throughout.
Mcamis brake/gas pedal assembly.
QA1 double adjustable shocks front and rear.
MBR 3gal fuel cell.
Mcamis Battery hold down.
Toyota IFS front differential.
MBR Billet 6061 Hubs.
MBR Moly Steering arms.
Driver side Aisin locking hub/Pass side drive fl**ge.
MBR Billet chain drive 1:1, dbl/50, 32spline rear/front output, Shorty glide adapter.
Strange billet 1350 rear yoke
TCI 1310 front yoke
44”cuts on Real 15x18”dbl bead locks, Wide 5 adapters
29”cuts on Real 15x8 single outer bead lock wheels.
Rear tube Push bar attachment.
89” Push bar.
Push bar hitch mount for tow vehicle.
72” moly wheelie bar.
115”wheelbase
Eng setback 12” from c/l frt axle- #1 cylinder.
C/l of front axle to lower seat back 84”
40k
Located:
Clarkston MI.

06/15/2025

Congratulations to Todd and his Team who got the Win yesterday at Silverback Offroad Speedway in the Door Slammer class!.

Address

Clarkston, MI
48348

Website

Alerts

Be the first to know and let us send you an email when Michigan Boyz RaceCraft posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category