Powerline Performance Machine

Powerline Performance Machine Automotive Repair Shop
(8)

Powerline machine will be closed from Friday the 4th thru Monday the 7th for Labor Day weekend. Have a fun and safe week...
09/03/2026

Powerline machine will be closed from Friday the 4th thru Monday the 7th for Labor Day weekend. Have a fun and safe weekend.

350 Olds ready for the dyno. 8.8 compression, 214/224-.474/.498 lift hydraulic flat tappet cam, performer intake and 600...
09/02/2026

350 Olds ready for the dyno. 8.8 compression, 214/224-.474/.498 lift hydraulic flat tappet cam, performer intake and 600 carb. Should be a great running street engine and I like the color also.

08/31/2026

390 Ford on the dyno. 10.5 compression, 248/.570 lift 109 lobe separation solid flat tappet cam, 6090g slightly ported heads, FPP dual plane intake and rockers and 850 carb. 455 hp@ 5800 and 440 trq @ 4100 rpm on pump gas.

08/25/2026

347 Stroker 302 Ford on the dyno. 10:1 compression, 224/232-.550 lift hydraulic roller cam, 190 cc Speedmaster heads, airgap intake and 750 carb. 420 hp and 415 trq. Sounds and runs great!

08/25/2026

A little bit sketchy set up on this FE intake but the daughter said (Send it!). It worked great.

Another 347 stroker ready for the dyno. 10:1 compression, 224/232 - .550 lift hydraulic roller, 190cc speedmaster heads,...
08/21/2026

Another 347 stroker ready for the dyno. 10:1 compression, 224/232 - .550 lift hydraulic roller, 190cc speedmaster heads, air gap intake and 750 Holley carb. We’ll try this next week. Have a good weekend.

08/18/2026

350 Chevy crate engine on the dyno. 9.1 compression, 224/234-.480 lift hydraulic flat tappet cam, Edelbrock eps intake and Quick fuel 600 carb. Pump gas with a little rougher idle. 335 hp and 370 trq.

08/14/2026

Here’s a mild 390 Ford street engine on the dyno. 9.5 compression, 224 duration.507 lift hydraulic cam, performer intake, factory single point distributor and 600 Edelbrock carb. 335 hp @ 5000 and 395 trq @ 3900 rpm. Should work great in his 2wd truck.

Old school 390 build. 10.5 compression, Cam motion 248/ .580 lift solid flat tappet cam, 6090g ported heads, Ford perfor...
08/13/2026

Old school 390 build. 10.5 compression, Cam motion 248/ .580 lift solid flat tappet cam, 6090g ported heads, Ford performance products intake and rockers and 850 Holley carb. We’ll see what it does on the dyno next week. I built it to sell but I might have to keep it. lol

08/12/2026

A good customer brought in this 347 Ford for a nice young ladies 62 Comet. 10:1 compression, D8 heads with bigger 351w valves and some light port work, 234/244-.520/.540 lift flat tappet hydraulic cam, rpm intake and 600 carb. 370 hp and 406 torque. She’ll really be tearing up the street!

Address

5065 90th Street
Chippewa Falls, WI
54729

Website

Alerts

Be the first to know and let us send you an email when Powerline Performance Machine posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Powerline Performance Machine:

Shortcuts

Share

Category