Cages By Colby

09/18/2015

08/10/2015

We are always or acting! Whether it be with cars,
Ladies, or fi****ms . You can never stop learning

08/10/2015

The tubes have been cleaned
Of rust and will
Be going back in the racecar!!
We have decided to NOT paint it and just clear coat the tubes resulting in a badass metal finish!!!

07/10/2015

We hope everyone had an awesome and safe 4th of July and hats off to all that serve. Thank you. Colby made some progress while everyone was staying busy. He got the uninterrupted X bars in on the passenger side of our 350z. We are researching new seats and harnesses and hoping that Takata Racing can help us make an ultimate decision! Econ Abrasives, Inc. Bend-Tech Software Cages By Colby Jimbo's Pizza Central Vapors Nissan KW-Suspensions HK

06/30/2015

Colby got the windshield pulled and the dash bar out. You can see the difference in overall
Diameter as well as wall diameter. This bar runs through the center of the dash from driver to passenger side .!talk about doing it right :)

06/29/2015

When we got the tractor, it was left in the sun for a few years. It would not start and was left with flat tires. All the hydraulic lines were dry rotted and the bucket seals were pi***ng hydraulic fluid. We welded a new ground for the battery and resolved the NO CRANK issue. Then it was time to replace every hydraulic line and seal for the bucket. After waiting on new bucket seals to arrive from China, Austin got them installed, thanks to Colby's custom made tool to remove the bucket seals. It was project in itself but we can now keep the pastures looking good!

06/29/2015

Let the bending begin, 8 days in! The tubes will eventually be tucked nice and neatly and we will have uninterrupted X door bars in place. This cage is very extensive and will be tied into the dash which most people neglect to do leaving their final cage vulnerable.

06/29/2015

Colby built the stand for the bender with what little metal we had left.. and that is just another reason why our fabricator is better than yours! chyuh He can TIG weld anything including trailers and tractors! keep that in mind

06/28/2015

Colby throwing some sparks while notching a tube for the Nissan 350z!

06/28/2015

We love Christmas. Thank you Santa..

06/28/2015

The day when our investment of tools arrived via UPS.