Starling’s CNC & Fab

Starling’s CNC & Fab Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Starling’s CNC & Fab, Automotive, aircraft & boat, Callahan, Callahan, FL.

Some of the machining jobs I’ve been doing lately.
10/04/2025

Some of the machining jobs I’ve been doing lately.

Repaired this grapple so it can get back to work.
10/04/2025

Repaired this grapple so it can get back to work.

Cut out the bad section of the floor and replaced. Also we replaced the section on the top that had been removed. Now it...
10/04/2025

Cut out the bad section of the floor and replaced. Also we replaced the section on the top that had been removed. Now it’s hauling corn.

Exhaust pipe rebuilt for an old skidder.
10/04/2025

Exhaust pipe rebuilt for an old skidder.

Built this root ripper for my Volvo mini excavator. Total width is 1.5” wide and it works great.
10/04/2025

Built this root ripper for my Volvo mini excavator. Total width is 1.5” wide and it works great.

Replaced some diamond plate sheeting for the lift gate for this food delivery truck.
10/04/2025

Replaced some diamond plate sheeting for the lift gate for this food delivery truck.

Had to repair this stump grinder. The boss for the pin basically fell off.
10/04/2025

Had to repair this stump grinder. The boss for the pin basically fell off.

This is a grill for a Kioti Tractor. Rolled a slight roll in it to match the frame. Also built the bolt on D-ring.
10/04/2025

This is a grill for a Kioti Tractor. Rolled a slight roll in it to match the frame. Also built the bolt on D-ring.

20x92” sign cut out of the customer’s material.
01/14/2025

20x92” sign cut out of the customer’s material.

36” Circle to match the logo.
01/14/2025

36” Circle to match the logo.

Had to remove the pin on plate from this pole driver and build one to fit the machine using the Xchange quick connect. A...
12/09/2024

Had to remove the pin on plate from this pole driver and build one to fit the machine using the Xchange quick connect. Added new hydraulic hoses and ran the power for the solenoid to switch to the grapple at the front of the attachment. Also replaced the cover on the side of the track carriage on the Bobcat E42. And replaced the broken dump lock on the dump trailer.

We’ve been working on these signs for a subdivision and they turned out great. 2 separate entrances and each sign is 4’x...
12/09/2024

We’ve been working on these signs for a subdivision and they turned out great. 2 separate entrances and each sign is 4’x12’ double sided.

Address

Callahan
Callahan, FL
32011

Website

Alerts

Be the first to know and let us send you an email when Starling’s CNC & Fab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category