Carr's Mobile Mechanicing

Carr's Mobile Mechanicing Hey! My name is Dan. I'm here to help people that can't get their vehicles or motorcycles to a shop.

Swapped out the rack & pinion and a power steering pump on this benz last week. German vehicles always have a strange wa...
06/21/2026

Swapped out the rack & pinion and a power steering pump on this benz last week. German vehicles always have a strange way of designing and mounting things.

Ran to West Plains and changed out some tie rod ends last week. Front end had a shimmy when pressing the brakes and coul...
06/21/2026

Ran to West Plains and changed out some tie rod ends last week. Front end had a shimmy when pressing the brakes and could feel some play in the steering wheel going around turns.

We changed some parts around on a 23' f350 last week. Should be a little lighter and get better mpg now with the upgrade...
06/21/2026

We changed some parts around on a 23' f350 last week. Should be a little lighter and get better mpg now with the upgrades!

We put some new front end parts in this 13' gmc sierra the other day. It had all oem parts and over 200k miles which is ...
06/21/2026

We put some new front end parts in this 13' gmc sierra the other day. It had all oem parts and over 200k miles which is pretty impressive to see.

Last job before vacation. Me and Chapo went and put a new windshield in this skidsteer.
05/24/2026

Last job before vacation. Me and Chapo went and put a new windshield in this skidsteer.

Going green! We swapped out some lower ball joints, upper control arms with joints, and inner outer tie rods with Mevote...
05/02/2026

Going green! We swapped out some lower ball joints, upper control arms with joints, and inner outer tie rods with Mevotech TTX parts on this 3500hd farm truck. Also replaced the steering idler bracket/arm as well. Should feel like quite the difference driving it now. Truck had a lot of play in the front end before it got tore apart today.

This jeep got dropped off a few weeks ago and said it had an oil leak, brake noise, and give it a once over. Oil leak wa...
04/30/2026

This jeep got dropped off a few weeks ago and said it had an oil leak, brake noise, and give it a once over. Oil leak was found and the passenger valve cover gasket was leaking right into the catalyst converter heat shield, so that smell was always burning off. We replaced both of them, spark plugs, intake gaskets, and changed the oil cooler housing while in the area as preventative maintenance being a known issue on these 3.6s. After the work in engine bay was done found that both wheels on passenger side brake pads were down to metal, and the shocks were in rough shape being very rusty and one was blown and leaking fluid. Got everything fixed, replaced and good to go again. Crazy that this vehicle just left a shop after it had "new lifters" installed but yet no gaskets were replaced? And also left there with a safety inspection but not even 1000 miles later it was left at my place and brakes were down to metal and had a blown shock? Some strange stuff on this one.

04/30/2026

Got a message asking if I could work in and make a trip to Eminence a few weeks ago to get this fixed asap. Drove down with parts I thought was needed to fix this issue and it wasn't enough. The car ended up needing a new Spindle, wheel bearings, rotor/hub, and brakes. But got it fixed up and they said car drives better than it ever has now.

Installed a Firestone helper bag set on this ram farm truck a few weeks ago. Guy asked if I could install the kit with o...
04/30/2026

Installed a Firestone helper bag set on this ram farm truck a few weeks ago. Guy asked if I could install the kit with onboard air to make it simpler for his wife to use the truck. The dash is very flat in these 4th gens and I wasn't comfortable putting it where I normally would above the driver pedal area. Ended up talking with the customer and we came to the conclusion that making use of this little panel area would work if I could make it happen. I did get it to work and all go together as clean as possible without running lines or wires across the ebrake release lever. Everything functions like normal still.

Got a call asking if we could pull an engine at his place in bucyrus a few weeks ago, said he had a cherry picker and le...
04/30/2026

Got a call asking if we could pull an engine at his place in bucyrus a few weeks ago, said he had a cherry picker and leveler to do the job. Once got there he asked if we could pull trans as well that way everything can be freshened up so he can comfortably finish up and put some miles on this cool old Javelin.

Address

1249 Chestnut Avenue
Cabool, MO
65689

Telephone

+14172594901

Website

Alerts

Be the first to know and let us send you an email when Carr's Mobile Mechanicing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Carr's Mobile Mechanicing:

Shortcuts

Share

Category